Tornado BDSO 27/28 Drive Wheel Control Parts

Find genuine Tornado BDSO 27/28 replacement parts for Models 99786 and 99786C. Can’t find your part? Call us at 763-535-0770.

Find the item number on the drawing, then match it to the same number in the table below that drawing. Each table lists the part description and Tornado’s part number for every numbered item on that sheet.

Drive Wheel Control — Up to S/N 20000980

This drawing covers machines up to serial number 20000980.

The drive wheel control assembly is what translates the operator’s input into traction drive output on the BDSO 27/28 — the control lever or pedal, its return spring, the potentiometer or sensor that reads its position, and the linkage between them. Symptoms here are distinctive: a machine that creeps when the control is released, one that reaches full speed too early in the travel, or one that will not drive in one direction. All three point at this assembly rather than at the drive motor. Tornado revised it twice, at S/N 20000981 and again at S/N 23000737, dropping callouts each time as the design simplified.

#ImagePart DescriptionPart NumberPrice
1Tornado BDSO 27/28 Screw M3 x 16 schematic diagram part number 60170307Screw M3 x 1660170307$1.99
2Tornado BDSO 27/28 Washer schematic diagram part number 60303006Washer60303006$1.99
3Tornado BDSO 27/28 Spacer schematic diagram part number 62406024Spacer62406024$3.99
4Tornado BDSO 27/28 Nylon Nut schematic diagram part number 60210304Nylon Nut60210304$1.99
5Tornado BDSO 27/28 Screw M4 x 8 schematic diagram part number 60140401Screw M4 x 860140401$1.99
6Tornado BDSO 27/28 Lock Washer schematic diagram part number 60304002Lock Washer60304002$1.99
7Tornado BDSO 27/28 Control Panel Cover schematic diagram part number 21512010Control Panel Cover21512010$55.99
—Instrument Panel Lable (BDSO27/28)65001149Call 763-535-0770
8Tornado BDSO 27/28 Control Panel Display Card schematic diagram part number 49704160Control Panel Display Card49704160$361.99
9Standoff62406025Call 763-535-0770

Drive Wheel Control — From S/N 20000981

This drawing covers machines from serial number 20000981 forward.

#ImagePart DescriptionPart NumberPrice
1Tornado BDSO 27/28 Screw M3 x 16 schematic diagram part number 60170307Screw M3 x 1660170307$1.99
2Tornado BDSO 27/28 Washer schematic diagram part number 60303006Washer60303006$1.99
3Tornado BDSO 27/28 Spacer schematic diagram part number 62406024Spacer62406024$3.99
4Tornado BDSO 27/28 Nylon Nut schematic diagram part number 60210304Nylon Nut60210304$1.99
5Tornado BDSO 27/28 Screw M4 x 7 schematic diagram part number 60100411Screw M4 x 760100411$1.99
6Tornado BDSO 27/28 Control Panel Cover schematic diagram part number 21512010Control Panel Cover21512010$55.99
—Instrument Panel Lable (BDSO27/28)65001149Call 763-535-0770
7Tornado BDSO 27/28 Control Panel Display Card schematic diagram part number 49704160Control Panel Display Card49704160$361.99
8Standoff62406025Call 763-535-0770

Drive Wheel Control — From S/N 23000737

This drawing covers machines from serial number 23000737 forward.

#ImagePart DescriptionPart NumberPrice
1Screw M3 x 660170302Call 763-535-0770
2HEXAGONAL SPACER M-F M3x663705005Call 763-535-0770
4Tornado BDSO 27/28 Nylon Nut schematic diagram part number 60210304Nylon Nut60210304$1.99
5Tornado BDSO 27/28 Screw M4 x 7 schematic diagram part number 60100411Screw M4 x 760100411$1.99
6Tornado BDSO 27/28 Control Panel Cover schematic diagram part number 21512010Control Panel Cover21512010$55.99
7Tornado BDSO 27/28 Control Panel Display Card schematic diagram part number 49704160Control Panel Display Card49704160$361.99
8Standoff62406025Call 763-535-0770

Frequently Asked Questions About the Tornado BDSO 27/28 Drive Wheel Control

My machine creeps forward when I let go of the control. What is wrong?

Most often the return spring or a worn pivot on this drawing, which leaves the position sensor off its neutral point. It can also be the sensor itself. Either way, take the machine out of service until it is fixed — a scrubber that creeps is a hazard.

Which drive wheel control drawing matches my machine?

There are three: up to S/N 20000980, from S/N 20000981, and from S/N 23000737. Each is shown on this page in serial order with its range stated.

Is this the same as the drive motor?

No. The drive motor and its wheel are separate; this assembly is the control that tells the drive how fast to turn. If the machine drives but will not modulate smoothly, look here first.

Not sure which drive wheel control part your machine takes? Call 763-535-0770 with the serial number from the data plate, or stop in at 5415 West Broadway, Crystal, MN 55428 — we have sold and serviced commercial floor equipment since 1956. You can also go back to all Tornado BDSO 27/28 parts diagrams or browse the Tornado BDSO 27/28 parts category.