Screw M3 x 16 60170307
$1.99
Genuine OEM M3 x 16 mm screw (part# 60170307) for Tornado floor scrubbers. It is the longer M3 used where a fastening passes through a spacer or component body.
Genuine OEM M3 x 16 mm screw (part# 60170307) for Tornado floor scrubbers — the machines it fits are listed below. In the drive wheel control assembly it is used where the screw passes through a component body or a spacer before reaching thread.
M3 is used on this machine where exact position matters more than clamping force — boards, switches, small brackets. The parts it holds are not heavy; they simply have to stay precisely where they were put, because a switch that has shifted a millimetre operates at the wrong point and a board that has moved strains its connectors.
The length is what distinguishes this screw from the shorter M3s used elsewhere. At 16 mm it is sized to cross a spacer or a component body and still engage proper thread beyond it. Substituting something shorter leaves the component only partly captured, which feels fine on assembly and works loose later; substituting something longer can press into whatever sits behind the mounting.
Handle it as the slender fastener it is. The drive recess rounds off if the driver is not an exact fit, and the shank bends easily — a bent M3 will not pull its component down square, and on a control assembly that means a part sitting at an angle.
If it will not hold, the tapped hole has usually failed rather than the screw: at M3 the host thread is the weaker of the two. Inspect it before fitting a replacement.
Compatible Models
- Tornado BD 28/20 — 99728
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
This part is shared across 5 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the drive wheel control drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
Where is the screw (part# 60170307) used?
In the drive wheel control assembly, where the screw passes through a component body or spacer before reaching thread. That is why it is the longer M3 rather than one of the shorter ones.
Can I use a shorter M3 instead?
No. A shorter screw leaves the component only partly captured — it feels fine on assembly and works loose later. A longer one can press into whatever sits behind the mounting.
Why does M3 need such careful handling?
Because there is very little margin. The drive recess rounds off if the driver is not an exact fit, the shank bends easily, and a bent M3 will not pull its component down square — which on a control assembly leaves a switch or board sitting at an angle.
How do I order the Screw M3 x 16 (part# 60170307) or get help?
You can add the Screw M3 x 16 (part# 60170307) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the screw m3 x 16 (part# 60170307) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet