Tornado BDSO 27/28 Control Panel Cover 21512010

$55.99

Genuine Tornado control panel cover for the BDSO 27/28 stand-on scrubber, Models 99786 and 99786C. Protects the panel and its switches from spray.

The control panel cover is the moulded housing that closes in the operator controls on a Tornado BDSO 27/28. Its job is to keep spray, splash and the water that comes off a full recovery tank away from the switches and wiring behind the panel, and it is the part most often damaged by the things that happen around a stand-on machine — door frames, racking uprights and the occasional dropped tool.

A cracked cover is not cosmetic. Once water can reach the back of the panel, switches start behaving intermittently, indicator lamps fail early, and corrosion creeps into connectors that are expensive to replace. The failures look electrical and get chased through the wiring diagram, when the actual cause is a split in a plastic cover that someone decided could wait.

Check the cover’s mounting points as well as the face. Covers usually crack at the screw bosses first, which lets the cover sit proud and opens a gap along one edge even when the panel itself looks sound. Use the fasteners shown on the drawing; over-long or over-tightened screws split the bosses and cause the problem all over again.

Replace a damaged cover before the next wash-down rather than after. Call 763-535-0770 if you want help identifying which cover your machine takes — Tornado revised the drive wheel control and control panel assemblies during production, and the serial number on your data plate decides which parts apply.

Compatible Models

See where this part sits on the machine on the drive wheel control drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the control panel cover do on the Tornado BDSO 27/28?

It encloses the operator controls and keeps spray and splash away from the switches and wiring behind the panel.

Is a cracked control panel cover worth replacing straight away?

Yes. Once water reaches the back of the panel you start getting intermittent switches, early lamp failures and corroded connectors, all of which cost far more than the cover.

What models is the control panel cover (part# 21512010) compatible with?

Tornado lists it for the BDSO 27/28 stand-on scrubber, Models 99786 and 99786C. The drive wheel control and control panel assemblies have serial-dated revisions, so check your data plate before ordering.

How do I order the control panel cover (part# 21512010) or get help?

You can add the control panel cover (part# 21512010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the control panel cover (part# 21512010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Tornado BDSO 27/28 Control Panel Cover 21512010”

Your email address will not be published. Required fields are marked *