Horn Push Button 63709004
$20.99
Genuine OEM horn push button (part# 63709004) for Tornado floor scrubbers. It is the panel button the operator presses to sound the horn.
Genuine OEM horn push button (part# 63709004) for Tornado floor scrubbers — compatible machines are listed below. It is the momentary push button on the control panel that sounds the horn.
A horn on a stand-on scrubber is a safety device, not a courtesy. The machine is quiet, it is wide, and it is used in aisles, around blind corners and in buildings where pedestrians are not expecting it. The operator needs to be able to warn someone instantly, with a button that works first time, from the hand position they already have on the controls. A horn button that needs a second press, or a hard press, is a defect worth fixing promptly.
Buttons fail from use and from the environment. The contacts pit and go high-resistance over thousands of presses, which gives a horn that works sometimes; the return spring weakens so the button stays in and the horn sticks on; the rubber boot or seal perishes, letting in moisture that corrodes the terminals; and the body cracks from an impact or from someone leaning on the panel.
If the horn does not sound, check the button before the horn. Measure across its terminals while it is pressed — that one reading separates a button fault from a horn, wiring or supply fault, and costs nothing.
When refitting, make sure any sealing washer or boot is seated properly. The button is on an exposed panel face, and water that gets in behind it ends up in the contacts and eventually in the wiring behind the panel.
Compatible Models
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 11 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the control panel drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the horn push button (part# 63709004) do?
It is the momentary panel button that sounds the horn — a safety device on a machine that is quiet, wide, and used in aisles and around blind corners.
The horn sounds only sometimes. Is it the button?
Usually. The contacts pit and go high-resistance over thousands of presses. Measure across the button terminals while it is pressed — that one reading separates a button fault from a horn, wiring or supply fault.
The horn sticks on. What causes that?
A weakened return spring, so the button stays in, or a seized plunger. Either way, fix it immediately — a stuck horn is both a nuisance and a sign the button has failed.
How do I order the Horn Push Button (part# 63709004) or get help?
You can add the Horn Push Button (part# 63709004) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the horn push button (part# 63709004) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet