Tornado Housing Bumper X8258A

$2.99

Genuine OEM housing bumper (part# X8258A) for commercial high-speed burnishers — the bumper fitted with the X8258AS screw on every Brute Force drawing. Fits all Tornado Brute Force burnishers (see full list below).

SKU: X8258A Category: Brand:

The X8258A is a bumper fitted to the machine housing, listed on every drawing in the Brute Force burnisher book and always paired with its own retaining screw (X8258AS) at the next callout: on the Brute Force 1600 (98458B) and Brute Force 2000 (98482B) drawings, and on both Brute Force 2000 Dust Control (98486) drawings. It is a shared part used across Tornado machines — see the full list of models below.

Unlike a push-in bumper, this one is screw-retained, which tells you something about where it sits: screw retention is used where a bumper takes repeated impact from a particular direction and a friction-fit part would eventually be knocked out. On a 20 inch burnisher worked up to walls and door frames all day, that is a sensible design and it also means the bumper can be replaced without disturbing anything else.

Replace the X8258A when it is torn, compressed flat, split at the screw hole, or hardened with age. Splitting at the screw hole is the common failure on screw-retained bumpers — the rubber tears around the fastener and the bumper starts to flap, after which it offers no protection at all. A bumper that has gone hard is just as useless as one that is missing: it transmits impact straight through to the housing instead of absorbing it.

Order the screw (X8258AS) with the bumper if the old one is corroded or its head is damaged; they are listed as a pair for a reason. Inspect the bumpers at every service — on a machine working inside a finished building, a few dollars of rubber is what stands between the machine and a repainting bill. The part is shared across the Brute Force line and carries no model name. Call 763-535-0770 if you want the bumper set listed for your machine.

Compatible Models

Frequently asked questions

What does the housing bumper (part# X8258A) do on a burnisher?

It absorbs impact where the machine housing contacts walls, door frames and fixtures, protecting both the building and the housing behind it.

How do I know if my X8258A bumper needs replacing?

Replace it if it is torn, compressed flat, split around the screw hole, or hardened with age. A hardened bumper passes impact straight into the housing and protects nothing.

Does the X8258A bumper come with its screw?

It is listed separately from its retaining screw (X8258AS), which appears at the next callout on every drawing. Order both if the old screw is corroded or its head is damaged.

What models is the housing bumper (part# X8258A) compatible with?

All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).

How do I order the housing bumper (part# X8258A) or get help?

You can add the housing bumper (part# X8258A) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Reviews

There are no reviews yet

Be the first to review “Tornado Housing Bumper X8258A”

Your email address will not be published. Required fields are marked *