Lock Nut 60220601
$1.99
Genuine OEM nylon-insert lock nut (part# 60220601) for Tornado floor scrubbers. It is the small lock nut used to hold the vacuum motor support hardware against the constant vibration the motor produces.
Genuine OEM nylon-insert lock nut (part# 60220601), used across a very wide range of Tornado floor scrubbers — the full machine list is below. On the vacuum assembly it secures the motor support hardware, working alongside a washer at the mounting points that carry the vacuum motor.
Of all the places on a scrubber to put a plain nut, the vacuum motor mounting is the worst. The motor runs at high speed for hours at a time and is never perfectly balanced; even with a vibration damper in the path, there is continuous high-frequency energy at these fasteners. A plain nut walks off under that. The nylon insert does not.
What that means in practice is that these nuts should be treated as consumables tied to the motor service rather than as permanent hardware. Every time the vacuum motor or its support comes apart, the lock nuts go in the bin and new ones go on. The insert is deformed by the thread on its first fitting and holds measurably less the second time — and here, second-rate holding means a motor mount loosening in service, which lets the motor move, which stresses the gasket, the damper and the exhaust connection all at once.
At inspection, any nut that can be spun down a clean thread by hand has lost its insert and must be replaced. So must any with a crumbling, melted or missing insert — heat from the motor is a real factor at this location — or with rounded hex corners or corrosion on the bearing face. If more than one is found loose, check the damper too: a collapsed damper lets vibration through that the fasteners were never meant to see.
This is the genuine Tornado part in the correct size and pattern, so the motor mounting holds the way the design intends.
Compatible Models
- Tornado BD14/4 Disc Brush Autoscrubber — 99414
- Tornado 17″ BD 17/6 Automatic Scrubber — 99617
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 22/14 — 99690
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado 99694 — TS350-W20-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 29 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the vacuum drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the lock nut (part# 60220601) do on a Tornado floor scrubber?
It secures the vacuum motor support hardware. The nylon insert keeps the nut in place against the continuous high-frequency vibration a vacuum motor produces, where a plain nut would walk off.
Can I reuse it when the motor comes out?
No. The insert is deformed by the thread on first fitting and holds less afterwards, and heat from the motor degrades it further. Fit new lock nuts whenever the vacuum motor or its support is reassembled.
Several of these were loose on my machine. What should I check?
The vibration damper. If it has hardened or collapsed, it is no longer isolating the motor and the fasteners are seeing vibration they were never meant to take. Replace the nuts and the damper, and check the motor gasket while you are there.
How do I order the Lock Nut (part# 60220601) or get help?
You can add the Lock Nut (part# 60220601) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the lock nut (part# 60220601) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet