Lock Nut M3 60220302

$1.99

Genuine OEM M3 lock nut (part# 60220302) for Tornado floor scrubbers. It is the small self-locking nut used behind switch and component mountings so vibration cannot shake them loose.

Genuine OEM M3 lock nut (part# 60220302) for Tornado floor scrubbers — the machines it fits are listed below. It is the nut that secures the small M3 screws behind switch and component mountings on the foot board and elsewhere on the machine.

A lock nut differs from a plain nut by a deliberate interference — a nylon insert or a deformed crown — that grips the bolt thread and resists the rotation vibration would otherwise cause. At M3 that matters more than the size suggests. These are the fastenings holding position-critical components like switches, and a nut that has backed off a turn does not announce itself by falling off; it lets the component drift a millimetre, which is enough to change where a switch operates and produce a fault nobody can reproduce.

The locking feature is consumable. Every removal and refit grips a little less, and after two or three cycles the nut spins down with almost no resistance — at that point it is a plain nut that looks like a lock nut. Fit a new one whenever you take a joint apart. On a component this small it is also worth checking the nut can still be gripped: a rounded M3 hex is hard to hold and harder to remove next time.

Replace it, rather than reusing it, if it threads on easily by hand all the way, if the nylon insert is missing, chewed or heat-glazed, or if the hex is rounded. Do not substitute a plain nut with thread adhesive on a component that has to come off again for service.

This is the genuine Tornado part, so the locking torque is what the joint was designed around.

Compatible Models

  • Tornado 30″ FK3000 Floorkeeper Automatic – Series C — 99430
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/27 — 99772
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 24 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the foot board drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the M3 lock nut (part# 60220302) do?

It secures the small M3 screws behind switch and component mountings. Its nylon insert or deformed crown grips the thread and resists the rotation that machine vibration would otherwise cause.

Can I reuse an M3 lock nut?

No — fit a new one. The locking feature is consumable: each removal and refit grips less, and after two or three cycles the nut spins down with almost no resistance and is just a plain nut that looks like a lock nut.

Why does a loose M3 nut matter so much?

Because these hold position-critical components. A nut backed off one turn does not fall off; it lets a switch drift a millimetre, which is enough to change where it operates and create an intermittent fault nobody can reproduce.

How do I order the Lock Nut M3 (part# 60220302) or get help?

You can add the Lock Nut M3 (part# 60220302) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the lock nut m3 (part# 60220302) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Lock Nut M3 60220302”

Your email address will not be published. Required fields are marked *