Lock Nut M4 INOX 60220403
$1.99
Genuine OEM M4 stainless lock nut (part# 60220403) for Tornado floor scrubbers. It is the small self-locking nut used at several points on the scrub head.
Genuine OEM M4 stainless (INOX) lock nut (part# 60220403) for Tornado floor scrubbers — compatible machines are listed below. On the brush base it appears at several positions, securing small fasteners behind brackets and mounted components.
A lock nut carries a deliberate interference — a nylon insert or a deformed crown — that grips the bolt thread and resists the rotation that vibration would otherwise cause. A scrub head vibrates all day: two brushes cutting into a floor, shock from every threshold, and a deck that is deliberately allowed some movement. A plain nut on that duty works loose.
The locking feature is consumable, and this is the rule most often skipped on a rebuild. Every removal and refit grips a little less; after two or three cycles the nut spins down with almost no resistance and is simply a nut that looks like a lock nut. Fit a new one whenever the joint comes apart. It is a few cents against a component that starts moving in its mounting.
Stainless is specified because the scrub head is the wettest place on the machine. It brings one handling quirk: stainless galls against stainless if it is run down dry and fast, and a galled M4 nut will neither tighten nor come off without destroying the screw. Run it down by hand first and tighten steadily rather than with an impact driver.
Replace rather than reuse a nut that threads on easily by hand all the way, whose nylon insert is missing, chewed or heat-glazed, or whose hex is rounded. Do not substitute a plain nut with thread adhesive on a joint that has to come apart for service.
Compatible Models
- Tornado BD14/4 Disc Brush Autoscrubber — 99414
- Tornado 17″ BD 17/6 Automatic Scrubber — 99617
- Tornado 20″ BD 20/11 — 99680
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado BD 32/26 — 99732
- Tornado BD 26/27 — 99772
- Tornado BD 33/30 — 99780
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
This part is shared across 16 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the brush base drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the M4 lock nut (part# 60220403) do?
It secures small fasteners behind brackets and mounted components on the scrub head. Its nylon insert or deformed crown grips the thread and resists the rotation that the head’s constant vibration would otherwise cause.
Can I reuse it?
No. The locking feature is consumable — each removal and refit grips less, and after two or three cycles it spins down with almost no resistance and is just a nut that looks like a lock nut. Fit a new one whenever the joint comes apart.
The nut seized part way on. Why?
Stainless galls against stainless when it is run down dry and fast, and a galled M4 will neither tighten nor come off without destroying the screw. Run it down by hand first and tighten steadily rather than with an impact driver.
How do I order the Lock Nut M4 INOX (part# 60220403) or get help?
You can add the Lock Nut M4 INOX (part# 60220403) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the lock nut m4 inox (part# 60220403) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the M4 lock nut (part# 60220403) do?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It secures small fasteners behind brackets and mounted components on the scrub head. Its nylon insert or deformed crown grips the thread and resists the rotation that the head’s constant vibration would otherwise cause.”}},{“@type”:”Question”,”name”:”Can I reuse it?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”No. The locking feature is consumable — each removal and refit grips less, and after two or three cycles it spins down with almost no resistance and is just a nut that looks like a lock nut. Fit a new one whenever the joint comes apart.”}},{“@type”:”Question”,”name”:”The nut seized part way on. Why?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Stainless galls against stainless when it is run down dry and fast, and a galled M4 will neither tighten nor come off without destroying the screw. Run it down by hand first and tighten steadily rather than with an impact driver.”}},{“@type”:”Question”,”name”:”How do I order the Lock Nut M4 INOX (part# 60220403) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the Lock Nut M4 INOX (part# 60220403) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet