Tornado BDSO 27/28 Control Panel Parts

Find genuine Tornado BDSO 27/28 replacement parts for Models 99786 and 99786C. Can’t find your part? Call us at 763-535-0770.

Find the item number on the drawing, then match it to the same number in the table below that drawing. Each table lists the part description and Tornado’s part number for every numbered item on that sheet.

Control Panel — Up to S/N 17005172

This drawing covers machines up to serial number 17005172.

The control panel is the operator interface on the BDSO 27/28 — the key switch, the function switches, the indicator or display, and the panel and gasket they mount into. It is also the assembly most often damaged by water, because it sits where spray and splash reach it. A switch that works intermittently, an indicator that stays dark, or a machine that will not key on usually traces to a part on this drawing before it traces to the controller. Tornado revised the panel twice: once at S/N 17005173 and again at S/N 20000937, and the callouts are not interchangeable between them.

#ImagePart DescriptionPart NumberPrice
1Emergency Stop Push Button63709010Call 763-535-0770
2Tornado BDSO 27/28 Switch w/Keys schematic diagram part number 63410001Switch w/Keys63410001$88.99
3Protection Cap63499008Call 763-535-0770
4Tornado BDSO 27/28 Horn Push Button schematic diagram part number 63709004Horn Push Button63709004$20.99
5Tornado BDSO 27/28 Drive Direction Manipulator schematic diagram part number 63407001Drive Direction Manipulator63407001$113.99
6Speed Adjustment Knob W/Nut61810018Call 763-535-0770
7Tornado BDSO 27/28 Potentiometer 2.5K schematic diagram part number 63415006Potentiometer 2.5K63415006$65.99
8Tornado BDSO 27/28 Screw M4 x 12 schematic diagram part number 60140403Screw M4 x 1260140403$1.99
9Tornado BDSO 27/28 Lock Washer schematic diagram part number 60304002Lock Washer60304002$1.99
10Control Panel21512050Call 763-535-0770
11Tornado BDSO 27/28 Contact Flange schematic diagram part number 63499002Contact Flange63499002$2.99
12Tornado BDSO 27/28 Contact for Switch schematic diagram part number 63413001Contact for Switch63413001$13.99
13Flange w/Contact63499030Call 763-535-0770

Control Panel — S/N 17005173–20000936

This drawing covers machines with serial numbers 17005173 through 20000936.

#ImagePart DescriptionPart NumberPrice
1Emergency Stop Push Button63709010Call 763-535-0770
2Tornado BDSO 27/28 Switch w/Keys schematic diagram part number 63410001Switch w/Keys63410001$88.99
—Key ONLY63499003$11.99
3Protection Cap63499008Call 763-535-0770
4Tornado BDSO 27/28 Horn Push Button schematic diagram part number 63709004Horn Push Button63709004$20.99
5Tornado BDSO 27/28 Drive Direction Manipulator schematic diagram part number 63407001Drive Direction Manipulator63407001$113.99
6Tornado BDSO 27/28 Potentiometer w/Knob schematic diagram part number 63415015Potentiometer w/Knob63415015$333.99
8Tornado BDSO 27/28 Screw M4 x 12 schematic diagram part number 60140403Screw M4 x 1260140403$1.99
9Tornado BDSO 27/28 Lock Washer schematic diagram part number 60304002Lock Washer60304002$1.99
10Tornado BDSO 27/28 Control Board Panel schematic diagram part number 21512070Control Board Panel21512070$24.99
—Dashboard Label65001167Call 763-535-0770
—Control Panel Decal (BDSO 27/28)65001166Call 763-535-0770
11Tornado BDSO 27/28 Contact Flange schematic diagram part number 63499002Contact Flange63499002$2.99
12Tornado BDSO 27/28 Contact for Switch schematic diagram part number 63413001Contact for Switch63413001$13.99
13Flange w/Contact63499030Call 763-535-0770
14Tornado BDSO 27/28 Screw M4 x 30 INOX schematic diagram part number 60110411Screw M4 x 30 INOX60110411$1.99
15Tornado BDSO 27/28 Lock Washer schematic diagram part number 60304002Lock Washer60304002$1.99
16Tornado BDSO 27/28 Lock Nut INOX schematic diagram part number 60220403Lock Nut INOX60220403$1.99

Control Panel — From S/N 20000937

This drawing covers machines from serial number 20000937 forward.

#ImagePart DescriptionPart NumberPrice
1Emergency Stop Push Button63709010Call 763-535-0770
2Tornado BDSO 27/28 Switch w/Keys schematic diagram part number 63410001Switch w/Keys63410001$88.99
3Protection Cap63499008Call 763-535-0770
4Tornado BDSO 27/28 Horn Push Button schematic diagram part number 63709004Horn Push Button63709004$20.99
5Tornado BDSO 27/28 Drive Direction Manipulator schematic diagram part number 63407001Drive Direction Manipulator63407001$113.99
6Tornado BDSO 27/28 Potentiometer w/Knob schematic diagram part number 63415015Potentiometer w/Knob63415015$333.99
8Screw M4 x 1060100410Call 763-535-0770
9Tornado BDSO 27/28 Control Board Panel schematic diagram part number 21512070Control Board Panel21512070$24.99
—Dashboard Label65001167Call 763-535-0770
—Control Panel Decal (BDSO 27/28)65001166Call 763-535-0770
10Tornado BDSO 27/28 Contact Flange schematic diagram part number 63499002Contact Flange63499002$2.99
11Tornado BDSO 27/28 Contact for Switch schematic diagram part number 63413001Contact for Switch63413001$13.99
12Flange w/Contact63499030Call 763-535-0770
13Tornado BDSO 27/28 Screw M4 x 30 INOX schematic diagram part number 60110411Screw M4 x 30 INOX60110411$1.99
14Tornado BDSO 27/28 Lock Washer schematic diagram part number 60304002Lock Washer60304002$1.99
15Tornado BDSO 27/28 Lock Nut INOX schematic diagram part number 60220403Lock Nut INOX60220403$1.99
16Tornado BDSO 27/28 Switch w/Keys schematic diagram part number 63410001Switch w/Keys63410001$88.99

Frequently Asked Questions About the Tornado BDSO 27/28 Control Panel

My machine will not key on at all. Where do I start?

Start with the key switch on this drawing and the battery connection. If the key switch passes continuity and the batteries are good, move to the electrical layout and wiring pages to check the main contactor and fuses.

Why are there three control panel drawings?

Tornado changed the panel twice during the BDSO 27/28 production run — up to S/N 17005172, S/N 17005173 to 20000936, and from S/N 20000937 forward. Parts are not interchangeable across the three, so match your serial number.

Can I replace a single switch, or do I need the whole panel?

Individual switches are listed separately on this drawing and are usually the right repair. Replace the whole panel only when the panel itself is cracked or the printing is gone.

Not sure which control panel part your machine takes? Call 763-535-0770 with the serial number from the data plate, or stop in at 5415 West Broadway, Crystal, MN 55428 — we have sold and serviced commercial floor equipment since 1956. You can also go back to all Tornado BDSO 27/28 parts diagrams or browse the Tornado BDSO 27/28 parts category.