Tornado BDSO 27/28 Control Board Panel 21512070
$24.99
Genuine OEM control board panel (part# 21512070) for the Tornado BDSO 27/28. It is the panel that carries the operator’s switches and controls.
Genuine OEM control board panel (part# 21512070) for the Tornado BDSO 27/28 stand-on scrubber. It is the panel the operator’s switches, buttons and controls are mounted through, and the face they look at while they are working.
A panel does two jobs. It holds every control in a fixed, known position — which is what lets an operator reach for the right one without looking, and what keeps each switch square to its mounting hole so it operates cleanly. And it is the first barrier between the machine’s electrics and a wet environment: solution spray, splash from the brushes, and the end-of-shift hose-down all arrive at this face.
That second job is the one that decides when it needs replacing. A panel that is cracked, that has an elongated or torn mounting hole, or whose surface finish has broken down stops sealing around its switches, and water then reaches the back of the panel where the contact blocks and wiring are. The resulting faults — intermittent functions, corroded terminals, a switch that works until the machine is washed — get chased through switches and boards while the real cause is a panel letting water through.
Elongated holes cause a second problem: a switch that can rotate in its hole twists its own wiring, and eventually a terminal breaks off.
Inspect it at service: look for cracks radiating from the switch holes, check each control is held firmly with no rotation, and confirm any gaskets or sealing washers behind the controls are present and in good condition.
Compatible Models
See where this part sits on the machine on the control panel drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the control board panel (part# 21512070) do?
It holds every operator control in a fixed position, keeps each switch square to its mounting hole, and acts as the first barrier between the machine’s electrics and solution spray, splash and the end-of-shift wash-down.
My panel switches work until the machine is washed. Why?
A cracked panel, a torn mounting hole, or a broken-down surface stops sealing around the switches, so water reaches the contact blocks and wiring behind. The symptom gets chased through switches and boards while the panel is the real cause.
Why do elongated mounting holes matter?
Because a switch that can rotate in its hole twists its own wiring every time it is operated, and eventually a terminal breaks off. Check each control is held firmly with no rotation.
How do I order the Control Board Panel (part# 21512070) or get help?
You can add the Control Board Panel (part# 21512070) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the control board panel (part# 21512070) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet