Switch Contact Block 63413001

$13.99

Genuine OEM switch contact block (part# 63413001) for Tornado floor scrubbers. It is the contact element that clips onto the back of a panel switch.

Genuine OEM switch contact block (part# 63413001) for Tornado floor scrubbers — compatible machines are listed below. It is the contact element that mounts on the back of a panel switch: the actuator at the front moves a plunger, and this block is what actually makes and breaks the circuit.

Panel switches on industrial equipment are built this way on purpose. The front assembly — the key barrel, the button, the selector — is mechanical and lasts a long time; the contacts are the consumable, because every operation is a small arc that erodes the contact surfaces. Making them a separate, replaceable block means a worn switch is usually a cheap repair instead of a panel strip-down.

So when a function on the panel stops working, check whether the switch body is fine and only the contacts have failed. Pitted contacts give a high-resistance joint, which on a control circuit shows as a function that works sometimes, works when the machine is cold, or starts after the switch is operated a few times. Fully failed contacts give nothing at all. The reverse symptom — a circuit that stays made — happens when contacts weld or the block is no longer being released properly.

Check that the block is fully latched onto the switch body as well. Vibration works a partly seated block loose over time, and the symptom is identical to a failing contact.

Test with a meter across the block rather than guessing: that single measurement separates a contact fault from a wiring fault and costs nothing.

Compatible Models

  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 26 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the control panel drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the switch contact block (part# 63413001) do?

It is the part that actually makes and breaks the circuit behind a panel switch. The actuator at the front moves a plunger, and this block carries the contacts.

Why is it a separate part from the switch?

Because the contacts are the consumable. Every operation is a small arc that erodes the contact surfaces, while the front assembly lasts far longer. Making the block replaceable turns a worn switch into a cheap repair instead of a panel strip-down.

A panel function works intermittently. How do I test this?

Put a meter across the block. Pitted contacts give a high-resistance joint — a function that works sometimes, or only when cold, or after the switch is worked a few times. Also check the block is fully latched onto the switch body; vibration works a partly seated block loose and the symptom is identical.

How do I order the Switch Contact Block (part# 63413001) or get help?

You can add the Switch Contact Block (part# 63413001) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the switch contact block (part# 63413001) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Switch Contact Block 63413001”

Your email address will not be published. Required fields are marked *