Potentiometer with Knob 63415015

$333.99

Genuine OEM potentiometer with knob (part# 63415015) for the Tornado BDSO 27/28. It is the panel control supplied complete, potentiometer and knob together.

Genuine OEM potentiometer with knob (part# 63415015) for the Tornado BDSO 27/28 stand-on scrubber. It is supplied as a complete control — the potentiometer and its knob together — which is the right way to replace it when both are worn, because the knob’s fit on the shaft is part of how well the control works.

The potentiometer turns the operator’s input into a signal the controller reads, and its resistance range is matched to what the controller expects. Fitting something of a different value shifts the whole scale, so the machine either reaches full output early in the knob’s travel or never reaches it at all.

Wear shows up as a control that no longer behaves smoothly. The wiper rubs a band into the resistive track over thousands of cycles, usually in the most-used part of the range, so the control jumps, surges or has a dead spot there while working normally elsewhere. On a machine control that unpredictability is more than an annoyance.

The knob matters as much as people expect it not to. A knob that has split, or whose grub screw has rounded its flat on the shaft, slips — so the operator turns the knob and the shaft follows part way, and the control appears weak or limited. That is often misdiagnosed as a failing potentiometer, and buying the assembly removes the question.

Before replacing, check for the obvious: a loose panel nut lets the whole potentiometer turn with the knob, which looks exactly like a dead control.

Compatible Models

This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the control panel drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the potentiometer with knob (part# 63415015) do?

It is the complete panel control — the potentiometer that turns the operator’s input into a signal the controller reads, supplied together with its knob.

Why buy it with the knob?

Because the knob’s fit on the shaft is part of how the control works. A split knob or a rounded grub-screw flat makes the knob slip, so the control feels weak or limited — which is often misdiagnosed as a failing potentiometer.

My control surges or has a dead spot. What is happening?

The wiper has worn a band into the resistive track, usually in the most-used part of the range, so the control is erratic there and normal elsewhere. Check first that the panel nut is tight — a loose one lets the whole potentiometer turn with the knob and looks like a dead control.

How do I order the Potentiometer with Knob (part# 63415015) or get help?

You can add the Potentiometer with Knob (part# 63415015) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the potentiometer with knob (part# 63415015) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Potentiometer with Knob 63415015”

Your email address will not be published. Required fields are marked *