Microswitch 5A 63409008
$51.99
Genuine OEM 5 amp microswitch (part# 63409008) for the Tornado BDSO 27/28. It is the higher-rated snap-action switch used where a circuit draws more current.
Genuine OEM microswitch (part# 63409008), rated 5 amps, for Tornado floor scrubbers — compatible machines are listed below. It is a snap-action switch: a small, precise amount of plunger travel flips the contacts over centre with a click, and the same small travel flips them back.
The current rating is the reason this switch exists alongside the machine’s other microswitches. A switch rated for a signal circuit will not survive switching a real load — the arc as the contacts part is what erodes them, and that arc is far more energetic at 5 amps than at a few milliamps. Fitting an under-rated switch in this position gives contacts that weld or burn out in weeks, so order by part number rather than by how the switch looks.
The snap action matters as much as the rating. A switch that changed state gradually would arc for longer each time; the over-centre mechanism makes the transition fast, which is what keeps contact erosion manageable at this current.
Failures are electrical and mechanical. Contacts pit, weld or go high-resistance after enough operations — a circuit that works intermittently, or works until the machine is warm. Plungers stick, usually with dried cleaning solution or grit around the body. Moisture gets inside and corrodes the terminals. And the body or lever cracks from a knock.
Test it off the machine: you should feel and hear a clean click, with continuity changing state exactly at that click. Then check whatever operates it, because a switch fitted into a worn mechanism fails the same way again.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BR 40/66 — 99795
This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the electrical layout drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the 5 amp microswitch (part# 63409008) do?
It is a snap-action switch rated to carry a real load rather than just a signal — a small amount of plunger travel flips the contacts over centre with a click.
Can I fit a lower-rated microswitch instead?
No. The arc as the contacts part is far more energetic at 5 amps than on a signal circuit, so an under-rated switch welds or burns out in weeks. Order by part number rather than by how the switch looks.
How do I test it?
Off the machine, you should feel and hear a clean click with continuity changing state exactly at that click. Then check whatever operates it — a new switch in a worn mechanism fails the same way again.
How do I order the Microswitch 5A (part# 63409008) or get help?
You can add the Microswitch 5A (part# 63409008) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the microswitch 5a (part# 63409008) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet