Nut M6 INOX 60210601

$1.99

Genuine OEM M6 stainless nut (part# 60210601) for Tornado floor scrubbers. It is the plain stainless nut used at squeegee and chassis fastenings that stay wet.

Genuine OEM M6 stainless (INOX) nut (part# 60210601) for Tornado floor scrubbers — compatible machines are listed below. It secures M6 fastenings at positions including the squeegee assembly, and it is used across a wide range of Tornado machines.

M6 is the size used where a joint needs genuine clamping force without being structural. The nut’s job is simple, but a few details decide whether the joint actually works: the thread pitch and the face flatness have to match, the nut has to seat squarely on a washer or a machined face rather than on paint or a burr, and it has to be run down without galling.

Stainless is specified because of where these fastenings sit. The squeegee is in recovery water all day and is hosed at the end of every shift. A plated nut there loses its coating at the first wrench mark, then rusts into its thread — and the cost is not the nut, it is the next service, where a two-minute job becomes a cut-off and a replacement stud.

Stainless has one handling quirk: it galls against stainless when run down dry and fast. A galled nut seizes part-way and will neither tighten nor come off. Run it down by hand, tighten steadily rather than with an impact driver, and fit the washer the assembly calls for.

Replace rather than reuse a nut whose hex is rounded, whose thread drags or has galled, or that has been distorted. And where the assembly specifies a lock nut or a wing nut, fit that part instead — a plain nut will vibrate loose on one and defeat tool-free service on the other.

Compatible Models

  • Tornado BD14/4 Disc Brush Autoscrubber — 99414
  • Tornado 30″ FK3000 Floorkeeper Automatic – Series C — 99430
  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 22/14 — 99690
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 30 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the squeegee drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

Where is the M6 nut (part# 60210601) used?

At M6 fastenings including on the squeegee assembly, where a joint needs genuine clamping force without being structural. It is used across a wide range of Tornado machines.

Why stainless rather than plated?

Because the squeegee is in recovery water all day and hosed every shift. A plated nut loses its coating at the first wrench mark and rusts into its thread — and the real cost is the next service, where a two-minute job becomes a cut-off and a new stud.

The nut seized half way on. What happened?

Stainless galls against stainless when run down dry and fast, and a galled nut will neither tighten nor come off. Run it down by hand first and tighten steadily rather than with an impact driver.

How do I order the Nut M6 INOX (part# 60210601) or get help?

You can add the Nut M6 INOX (part# 60210601) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the nut m6 inox (part# 60210601) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Nut M6 INOX 60210601”

Your email address will not be published. Required fields are marked *