Nylon Washer 60308011

$6.99

Genuine OEM nylon washer (part# 60308011) for Tornado stand-on floor scrubbers. It is the non-metallic washer used in the frame where a joint needs to slide or insulate rather than grip.

Genuine OEM nylon washer (part# 60308011) for Tornado stand-on floor scrubbers — the machine list is below. It is used on the frame assembly where a plain steel washer would be wrong, and it is worth understanding why rather than substituting one.

A nylon washer does things steel cannot. It lets two parts bear on each other and still move without galling or squeaking. It stops a fastener head from scoring a painted or plated surface. And it electrically separates the two faces it sits between, which matters anywhere a frame joint is near wiring or a sensor earth. Any of those is reason enough to specify nylon, and a steel washer dropped in its place quietly removes that property.

Inspect it whenever the joint is apart. Replace it if it has gone brittle or cracked (nylon ages, especially with UV and heat), if it has crushed noticeably thinner than a new part, if it has deformed into a dish, or if it has melted or glazed — glazing means it has been running hotter or faster than it should, which is worth investigating in itself.

Do not over-torque the fastener that clamps it. Nylon creeps under sustained load: a washer that is crushed on assembly keeps flowing for weeks afterwards, and the joint that felt tight on the day is loose at the next service. Torque to the specified value and re-check at the following service rather than guessing with a long wrench.

This is the genuine Tornado part in the correct diameter and thickness, so the joint keeps its clearance and the nylon does the job it was chosen for.

Compatible Models

This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the frame drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

Why is a nylon washer used instead of a steel one?

Because nylon lets two parts bear and still move without galling or squeaking, protects painted or plated faces from the fastener head, and electrically separates the two surfaces. A steel washer in its place quietly removes all three properties.

How do I know if the nylon washer (part# 60308011) needs replacing?

Replace it if it is brittle or cracked, crushed noticeably thinner than a new one, dished, or glazed and shiny. Glazing means it has been running hotter or faster than it should, which is worth investigating.

Can I just torque it down hard?

No. Nylon creeps under sustained load, so a washer crushed on assembly keeps flowing for weeks and the joint goes loose. Torque to the specified value and re-check at the next service.

How do I order the Nylon Washer (part# 60308011) or get help?

You can add the Nylon Washer (part# 60308011) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the nylon washer (part# 60308011) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Nylon Washer 60308011”

Your email address will not be published. Required fields are marked *