Plastic Brush Holder Plate 20302250

$35.99

Genuine Tornado plastic brush holder plate (part# 20302250) — fits 19 Tornado autoscrubber models including the BDSO 27/28. Carries and drives the scrub brush.

Genuine Tornado plastic brush holder plate, part number 20302250, used on 19 Tornado autoscrubber models including the BDSO 27/28. The holder plate is the driven plate the scrub brush locks onto. It takes the torque from the transmission and passes it to the brush, and it takes the side loads every time the deck meets a threshold or a pallet corner.

The lugs are what wear. Each time a brush is fitted and removed the lugs take a knock, and after enough cycles they round off so the brush no longer locks positively. A brush on rounded lugs chatters under load, wears unevenly and can drop off the plate entirely in service. The second failure is cracking around the centre, usually after an impact, which lets the plate run out of true and makes the whole deck vibrate.

Inspect the plate whenever you change brushes — it is already exposed. Look for rounded or chipped drive lugs, cracks radiating from the centre, and any wobble when you turn it by hand. If you are replacing brushes more often than you used to and they are wearing unevenly, check the plate before you blame the brushes.

Call 763-535-0770 if you want to confirm the right holder plate for your machine before you order.

Compatible Models

  • Tornado BD14/4 Disc Brush Autoscrubber — 99414
  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/30 — 99760
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BD 33/30 — 99780
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U

This part is shared across 18 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the brush base transmission drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the plastic brush holder plate do?

It is the driven plate the scrub brush locks onto, transferring torque from the transmission to the brush and taking the side loads from the deck.

My brushes are wearing unevenly. Could it be the holder plate?

Yes. Once the drive lugs round off the brush no longer locks positively, so it chatters under load and wears unevenly. Check the plate before replacing brushes again.

What models is the brush holder plate (part# 20302250) compatible with?

Tornado lists it on 19 autoscrubber models, including the BDSO 27/28 stand-on scrubber. The full list is above.

How do I order the brush holder plate (part# 20302250) or get help?

You can add the brush holder plate (part# 20302250) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the plastic brush holder plate (part# 20302250) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the plastic brush holder plate do?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It is the driven plate the scrub brush locks onto, transferring torque from the transmission to the brush and taking the side loads from the deck.”}},{“@type”:”Question”,”name”:”My brushes are wearing unevenly. Could it be the holder plate?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Yes. Once the drive lugs round off the brush no longer locks positively, so it chatters under load and wears unevenly. Check the plate before replacing brushes again.”}},{“@type”:”Question”,”name”:”What models is the brush holder plate (part# 20302250) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Tornado lists it on 19 autoscrubber models, including the BDSO 27/28 stand-on scrubber. The full list is above.”}},{“@type”:”Question”,”name”:”How do I order the brush holder plate (part# 20302250) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the brush holder plate (part# 20302250) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Plastic Brush Holder Plate 20302250”

Your email address will not be published. Required fields are marked *