Plastic Handle Clamp Knob X8016
$4.99
Genuine OEM plastic handle clamp knob (part# X8016) for Tornado and Powr-Flite commercial high-speed burnishers — the hand knob on the handle clamp hardware. Fits all Tornado Brute Force burnishers (see full list below).
The X8016 is the moulded plastic knob on the handle clamp hardware of the Brute Force burnishers. It appears on all four drawings in the book, on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B), and on the current and earlier Brute Force 2000 Dust Control (98486) drawings, grouped with the handle clamp parts.
A hand knob is a torque-transfer part. It has a metal thread or insert moulded into plastic, and every time the operator sets the handle, the whole clamping force passes from a human hand through that plastic-to-metal joint. Over a few years of daily use the plastic around the insert fatigues, and that is where these knobs fail.
Replace the X8016 when the knob spins on its insert, when it is cracked (look at the base of the knob where it meets the thread), when the ribs have worn smooth so it cannot be gripped with a wet hand, or when a piece has broken off. The symptom to watch for is a knob that can be turned easily but no longer clamps — that is the insert slipping inside the plastic, not the thread wearing out, and no amount of extra force will fix it. Replace rather than improvise: a pair of pliers on a cracked knob will get the machine through the shift and finish the knob.
A knob is also the right first suspect when a handle will not stay put, because it is cheaper than the lever, clamp and brace behind it. If a new knob does not solve it, work up through the cam lever (X1184), handle lock clamp (X1456) and handle brace (X1464). This part is shared across the Brute Force line and carries no model name. Call 763-535-0770 if you want the handle hardware set listed. It is a shared part used across Tornado and Powr-Flite machines — see the full list of models below.
Compatible Models
- Tornado models:
- P Series 17″ Floor Machine With Pad Holders (115V) — 97562
- 17″ — 97562B
- P Series 17″ Floor Machine With Pad Holders (230V) — 97563
- P Series 20″ Floor Machine With Pad Holders (115V) — 97564
- 20″ — 97564B
- P Series 20″ Floor Machine With Pad Holders (230V) — 97565
- 17″ — 97590
- 20″ 1.5 HP M Series — 97595
- P Series 1600 Glazer (115V) — 98458
- Brute Force 1600 — 98458B
- P Series 1600 Glazer (230V) — 98459
- 17″ 1.5 HP — 98476
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- 20″ 1.5 HP — 98484
- Brute Force 2000 High-Speed Glazer with Dust Control — 98486
- P Series 2000 Glazer (230V) — 98487
- Powr-Flite models:
- B171
- B172
- B201
- B202
- C131
- C131G
- C171
- C171HD
- C171HDG
- C171SD
- C172
- C201
- C201HD
- C202
- C202G
- NM1600
- NM171HD
- NM171SD
- NM2000
- NM2000DC
- NM201HD
- NM202
Frequently asked questions
What does the plastic handle clamp knob (part# X8016) do on a burnisher?
It is the hand knob on the handle clamp hardware — the part the operator turns to clamp the handle at the working angle.
How do I know if my X8016 handle clamp knob needs replacing?
Replace it if the knob spins on its insert, if it is cracked at the base where it meets the thread, if the grip ribs are worn smooth, or if part of it has broken off.
My handle will not stay set — should I start with the knob?
Yes, it is the cheapest part in that load path. If a new knob does not fix it, work up through the cam lever (X1184), the handle lock clamp (X1456) and the handle brace (X1464).
What models is the plastic handle clamp knob (part# X8016) compatible with?
All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).
How do I order the plastic handle clamp knob (part# X8016) or get help?
You can add the plastic handle clamp knob (part# X8016) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet