Powr-Flite 16 inch Economy Pad Driver TL16

The Powr-Flite TL16 is a 16-inch economy pad driver with a built-in riser and a factory-installed UP2P clutch plate, built to mount a floor pad on a Powr-Flite 17-inch rotary floor machine. The pad driver is the part that grips the underside of a buffing, scrubbing, stripping, or polishing pad and transfers the motor’s rotation to the floor. On a 17-inch machine such as the Classic Metal C171HD or the Millennium NM171HD, a 16-inch driver carries a 17-inch pad — Powr-Flite’s rule is to run a pad the same size as, or one inch larger than, the driver, so the TL16 pairs with the standard 17-inch pad line.

What sets the “economy” TL16 apart from a tufted driver like the 717DP is its molded gripper face and built-in riser: there is no separate riser to buy or lose, and the UP2P plastic clutch plate is already installed, so the driver drops onto the machine’s motor shaft and locks in with no extra hardware. The gripper face holds the pad by friction across its whole surface, which keeps the pad centered at speed and stops it from walking off the driver mid-pass.

A pad driver is a wear item. Every pad change scuffs the gripper face, and heat and cleaning solution slowly harden it. When a driver is worn, the pad slips or spins off-center, the finish comes out streaky or swirled, and in bad cases the pad is thrown off the machine. If your pads no longer sit tight, if you hear the pad chattering against the floor, or if the clutch plate is cracked or the center hole has worn oval, it is time to replace the driver. Running a worn driver wastes pads and can gouge a finished floor.

Compatible Models

Powr-Flite confirms the TL16 16-inch economy pad driver for its 17-inch rotary floor machines:

• Powr-Flite Classic Metal Floor Machine 17 inch 1.5 HP — C171HD
• Powr-Flite Millennium Floor Machine 17 inch 1.5 HP — NM171HD

Always confirm your machine’s pad-driver size before ordering. Twin City Vacuum has serviced Powr-Flite floor equipment since 1956 — call 763-535-0770 if you need help matching the right driver, riser, and pad to your machine.

Frequently Asked Questions

What does the Powr-Flite TL16 pad driver do?
The TL16 (part# TL16) is the 16-inch pad driver that holds a floor pad on a Powr-Flite 17-inch rotary floor machine and transfers the motor’s spin to the pad. Its built-in riser and pre-installed UP2P clutch plate let it mount directly on the machine’s shaft.

How do I know if my TL16 pad driver needs replacing?
Replace the TL16 when pads slip or spin off-center, the finish comes out streaky, the gripper face is glazed or worn smooth, or the clutch plate is cracked or its center hole has worn oversize.

What models is the TL16 (part# TL16) compatible with?
Powr-Flite confirms the TL16 for the 17-inch Classic Metal C171HD and 17-inch Millennium NM171HD floor machines. A 16-inch driver runs a 17-inch pad on these machines.

How do I order the TL16 (part# TL16) or get help?
You can add the TL16 (part# TL16) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Powr-Flite equipment since 1956 and can help confirm the right part for your machine.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the Powr-Flite TL16 pad driver do?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The TL16 (part# TL16) is the 16-inch pad driver that holds a floor pad on a Powr-Flite 17-inch rotary floor machine and transfers the motor’s spin to the pad. Its built-in riser and pre-installed UP2P clutch plate let it mount directly on the machine’s shaft.”}},{“@type”:”Question”,”name”:”How do I know if my TL16 pad driver needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Replace the TL16 when pads slip or spin off-center, the finish comes out streaky, the gripper face is glazed or worn smooth, or the clutch plate is cracked or its center hole has worn oversize.”}},{“@type”:”Question”,”name”:”What models is the TL16 (part# TL16) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Powr-Flite confirms the TL16 for the 17-inch Classic Metal C171HD and 17-inch Millennium NM171HD floor machines. A 16-inch driver runs a 17-inch pad on these machines.”}},{“@type”:”Question”,”name”:”How do I order the TL16 (part# TL16) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the TL16 (part# TL16) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Powr-Flite equipment since 1956 and can help confirm the right part for your machine.”}}]}