Powr-Flite Extractor Pump 220 PSI (Aquatec) AQ200

The Powr-Flite extractor pump (part# AQ200) is a genuine 120-volt Aquatec demand pump that pressurizes cleaning solution to 220 PSI on Powr-Flite carpet extractors. It is the component that turns tank solution into the high-pressure spray your wand or jets deliver into the carpet, so a strong pump is what separates a machine that truly cleans from one that only rinses.

This is a demand-style pump: it senses the trigger, runs to build pressure, and cuts out when you release. Over years of daily use the internal diaphragm and check valves wear, which is why the pump is one of the most commonly replaced functional parts on a box or portable extractor.

Compatible Models for the Powr-Flite Extractor Pump (AQ200)

• Powr-Flite Pulsar Gamma 10-Gallon Carpet Extractor — PE200-G10-U
• Powr-Flite Pulsar Gamma 15-Gallon Carpet Extractor — PE200-G15-U
• Powr-Flite Carpet Extractor — TE200-G15-U
• Powr-Flite 98260 Apartment Pro Portable Extractor
• Powr-Flite 98262 Room-Mate Portable Extractor

Signs your AQ200 pump needs replacing

The most common symptoms are no spray at all, or a weak and sputtering spray that will not build pressure. You may hear the pump running loud or continuously, or find that it fails to shut off when you release the trigger. A demand pump that cannot hold pressure — cycling constantly or bleeding down — is worn out and should be replaced to restore full 220 PSI cleaning performance.

Installing a genuine AQ200 brings a tired extractor back to full spray pressure. Twin City Vacuum has been selling and servicing Powr-Flite equipment since 1956, and we stock the matching pulse hose (part# X2270) and solution plumbing to service the whole pressure circuit. Browse the full Powr-Flite Pulsar Gamma parts and accessories, or read more at the Powr-Flite manufacturer site.

Frequently Asked Questions

What does the Powr-Flite extractor pump (part# AQ200) do on a carpet extractor?

The AQ200 is the 120-volt Aquatec demand pump that pressurizes cleaning solution to 220 PSI and pushes it out to the wand or spray jets. It is the heart of the solution system — if the pump weakens or fails, the machine still vacuums but no longer sprays cleaning solution at working pressure.

How do I know if my AQ200 pump needs replacing?

Common signs are no spray or a weak, sputtering spray, a pump that runs loudly or continuously without building pressure, or a pump that will not shut off when the trigger is released. Because it is a demand pump, a healthy AQ200 should cycle on under trigger and cut out cleanly when you stop spraying; failure to hold pressure points to a worn pump.

What models is the Powr-Flite extractor pump (part# AQ200) compatible with?

The AQ200 220 PSI Aquatec pump is a shared Powr-Flite extractor part used on the Pulsar Gamma PE200-G10-U and PE200-G15-U, the TE200-G15-U, and the Powr-Flite 98260 Apartment Pro and 98262 Room-Mate portable extractors. Always confirm your machine’s pump specification before ordering.

How do I order the Powr-Flite extractor pump (part# AQ200) or get help?

You can add the Powr-Flite extractor pump (part# AQ200) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Powr-Flite equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.