Powr-Flite PF85DX Gulper II Flood Extractor (15-Gallon, Pump-Out)

The Powr-Flite PF85DX Gulper II flood extractor is a 15-gallon water-recovery machine built for flood response and large water pickups. Unlike a spray carpet extractor, the Gulper II is about recovery: a 135-inch water-lift vacuum pulls standing water fast, and a built-in pump-out discharges the recovery tank at 10 gallons per minute — twice the rate of the standard PF85 — so you empty into a drain continuously instead of stopping to dump. It is the machine for water-damage restoration, overflow cleanup, and wet-vacuuming after extraction.

What Ships

The PF85DX ships ready to run on a standard 115V circuit with a 2-inch by 25-foot vacuum hose and 25-foot cord. Recovery tools and squeegee wands are selected for the job — call 763-535-0770 and we will spec them.

Powr-Flite PF85DX Specifications

Powr-Flite Extractor Comparison

The four larger Powr-Flite extractors we stock, side by side. The PFX900S is a self-contained walk-behind that scrubs and recovers in one pass; the PFX1080 and heated PFX1080CW are box (portable) extractors you run with a wand; and the PF85DX Gulper II is a flood / water-damage recovery machine with a built-in pump-out. For higher-pressure and heated box extractors, see the Pulsar tier linked below.

Related: Pulsar Carpet Extractors

Need higher solution pressure or on-board heat for faster drying? The Powr-Flite Pulsar box-extractor tier steps up from these machines: the Pulsar Plus 15-gallon (100 PSI), the heated Pulsar Gamma Plus 15-gallon (220 PSI, heated), and the Pulsar Delta Plus 15-gallon (500 PSI, dual-motor, heated). Call 763-535-0770 and we will match the extractor to your soil load, dry-time target, and budget.

Shipping

Free shipping — this extractor ships to your location at no added freight cost. Questions on delivery or setup? Call us at 763-535-0770.

Twin City Vacuum — Powr-Flite Commercial Dealer Since 1956

Twin City Vacuum has sold and serviced commercial carpet and floor equipment from our shop at 5415 West Broadway, Crystal, MN 55428 since 1956. We stock the Powr-Flite extractor line, the wands, hoses, and tools that fit them, and we service what we sell. See the full manufacturer specifications on the Powr-Flite PF85DX spec page, then call 763-535-0770 to spec the right extractor and tools for your work.

Recommended Accessories & Consumables

Keep the PF85DX Gulper II running with the genuine accessories and consumables below:

Powr-Flite 20 ft Vacuum Recovery Hose (No Cuffs) X8550 — $86.99Powr-Flite 3in Combination Hand Tool for Spotters 77001 — $386.99

Frequently Asked Questions

What is the Powr-Flite PF85DX Gulper II used for?

The PF85DX Gulper II is a 15-gallon flood / water-damage recovery extractor. Its 135-inch water-lift vacuum recovers standing water fast, and a built-in pump-out empties the tank at 10 gallons per minute for continuous water pickup — floods, overflows, and restoration work.

What is the difference between the PF85DX and the PF85?

Both share the Gulper II platform; the PF85DX has a faster built-in pump-out — 10 gallons per minute of discharge versus 5 GPM on the PF85 — so the DX empties nearly twice as fast during big water recoveries.

Is the PF85DX a carpet cleaning extractor?

No — it is a water-recovery / flood extractor, not a spray carpet extractor. It recovers standing water and pumps it out. For spray-and-extract carpet cleaning, see the PFX1080 box extractor or the Pulsar tier.

How is the PF85DX shipped, and how do I order?

The PF85DX ships free to your location by freight, ready to run. Order it on this page or call 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has sold and serviced Powr-Flite equipment since 1956 and can spec recovery tools for your work.