Powr-Flite Pulsar Delta 10-Gallon Carpet Extractor – 500 PSI, Dual Motor, Heated PE310-G10-U
$4,460.00
Genuine Powr-Flite Pulsar Delta (PE310-G10-U) — 10-gallon 500 PSI dual-motor heated commercial carpet extractor. Ships from Crystal, MN. Call 763-535-0770.
The Powr-Flite Pulsar Delta (PE310-G10-U) is a high-output 10-gallon box extractor built for the most demanding restorative carpet cleaning. It sprays at up to 500 PSI, runs a dual Airwatt vacuum motor (1250 watts, 215 inches of waterlift), and warms solution through a dual-element heater — a big step up in pressure, suction, and heat over the 220 PSI single-motor Pulsar Gamma line, so it lifts heavier soil and dries faster.
See the Powr-Flite Pulsar in Action
Note: this is the Powr-Flite Pulsar line introduction video — Powr-Flite does not publish a separate video specific to the Delta.
Powr-Flite Pulsar Delta Specifications
The Pulsar Delta carries matching 10-gallon solution and recovery tanks and sprays at an adjustable 50–500 PSI through a dual-element heater. Its dual Airwatt vacuum motor is rated at 1250 watts, 133 CFM, and 215 inches of waterlift for aggressive recovery. It connects with a 1-1/2-inch by 20-foot hose and a 25-foot 20-amp dual-circuit cord, rolls on 4-inch front casters and 12-inch rear wheels, and weighs 166 pounds. Powr-Flite backs it with a 2-year parts, 1-year labor, and 10-year housing warranty.
What’s in the box
The Pulsar Delta includes a 25-foot 20-amp power cord, a 1-1/2-inch by 20-foot BlackMax 500 PSI vacuum/solution hose, and a quart of neutral-pH Powr-Extract extraction cleaner. A wand and cleaning tools are sold separately — browse our Powr-Flite carpet extractor accessories, or call Twin City Vacuum at 763-535-0770 to match the right wand to your machine.
Powr-Flite Carpet Extractor Comparison
| Spec | Pulsar Delta (PE310-G10-U) | Pulsar Gamma+ (PE200-G15-U) | Pulsar Gamma (PE200-G10-U) |
|---|---|---|---|
| Solution / Recovery Tank | 10 gal / 10 gal | 15 gal / 15 gal | 10 gal / 10 gal |
| Pump Pressure | Up to 500 PSI | 220 PSI | 220 PSI |
| Heater | Dual element | Single element | Single element |
| Vacuum Motor | Dual Airwatt, 1250 W | Single, 625 W | Single, 625 W |
| Waterlift | 215 in | 125 in | 125 in |
| Weight | 166 lbs | 152 lbs | 146 lbs |
Step up to the Delta when you need maximum pressure and suction; choose the Gamma+ for larger tank capacity at standard pressure, or the Gamma for a lighter 220 PSI machine.
Recommended Accessories & Add-Ons
Powr-Flite Extractor Power Cord 25 ft X2019$90.99
Powr-Flite Carpet Extractor Spray Tip QMV-11002 X9139B$44.99
Powr-Flite Pulsar Pulse Hose Assembly X2270$123.99Frequently Asked Questions
What makes the Pulsar Delta different from the Pulsar Gamma?
The Pulsar Delta (PE310-G10-U) is a higher-output machine. It sprays at up to 500 PSI — versus 220 PSI on the Gamma — and pairs a dual Airwatt vacuum motor (1250 watts, 215 inches of waterlift) with a dual-element heater. That extra pressure, suction, and heat make it a restorative extractor for the toughest, most heavily soiled commercial carpet.
How much pressure and suction does the Pulsar Delta have?
The Pulsar Delta runs an adjustable pump up to 500 PSI and a dual Airwatt vacuum motor rated at 1250 watts, 133 CFM, and 215 inches of waterlift. The high pressure drives cleaning solution deep into the pile while the dual-motor vacuum pulls it — and the soil — back out for faster drying.
Is the Pulsar Delta heated?
Yes. The Pulsar Delta uses a dual-element heater to warm the cleaning solution, which speeds soil breakdown and drying. Combined with 500 PSI pressure and dual-motor recovery, the heat is what lets the Delta restore heavily used carpet in a single pass rather than several.
Does the Pulsar Delta include a wand?
No. The Pulsar Delta ships with a 25-foot 20-amp dual-circuit power cord, a 1-1/2-inch by 20-foot BlackMax 500 PSI vacuum/solution hose, and a quart of neutral-pH Powr-Extract cleaner. A cleaning wand is sold separately so you can match it to your work.
How do I order the Powr-Flite Pulsar Delta (PE310-G10-U) or get help?
You can add the Powr-Flite Pulsar Delta (PE310-G10-U) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been selling and servicing Powr-Flite equipment since 1956 and can help you choose the right extractor and the correct wear parts.
Complete Your Pulsar Delta
Genuine wear parts that fit the Pulsar Delta:
The Delta’s 500 PSI pump and BlackMax high-pressure hose are model-specific parts (different from the 220 PSI Gamma line) — call 763-535-0770 and we’ll confirm the exact part for your machine.
Popular Pulsar Delta Parts
Twin City Vacuum has sold and serviced Powr-Flite equipment since 1956. Browse the Powr-Flite lineup, or see the machine on the manufacturer site at powr-flite.com. Questions? Call 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428.
Reviews
There are no reviews yet