Powr-Flite NM2000 Millennium 20 inch Burnisher (2,000 RPM, 1.5 HP)
$1,399.00
The Powr-Flite NM2000 burnisher is a 20-inch, 2,000 RPM high-speed electric floor burnisher (1.5 HP, Millennium housing) for high-gloss maintenance of VCT, terrazzo, and sealed concrete. Ships free; pad driver and pads sold separately.
The Powr-Flite NM2000 burnisher is a 20-inch, 2,000 RPM high-speed electric floor burnisher built on Powr-Flite’s Millennium platform. At 2,000 RPM it lays down a deep wet-look gloss on finished VCT, terrazzo, and sealed concrete far faster than a low-speed floor machine, and the counterweighted 1.5 HP motor keeps the pad flat so the shine is even edge to edge. A long 75-foot power cord means fewer outlet changes across big open floors.
What Ships
The Powr-Flite NM2000 burnisher ships as the base machine — motor, handle, deck, and the 75 ft power cord, assembled and ready to run on 120V. The 20-inch pad driver and burnishing pads are selected separately to match your floor finish (see below). Call 763-535-0770 and we will spec the driver and pad grades for you.
Powr-Flite NM2000 Specifications
| Type | High-speed electric burnisher (corded) |
|---|---|
| Pad size | 20″ |
| Pad speed | 2,000 RPM |
| Motor | 1.5 HP |
| Power cord | 75 ft, 12/3 SJTW-A |
| Voltage | 120V / 60 Hz |
| Housing | Millennium |
| Machine weight | 89 lb |
| Warranty | 1 year parts & labor, 10-year housing |
| SKU | NM2000 |
| UPC | 098612370307 |
Powr-Flite Burnisher Comparison
All four Powr-Flite high-speed electric burnishers we stock, side by side. Every one drives a 20-inch pad; the Millennium models spin at up to 2,000 RPM for the highest wet-look gloss, the 1,600 RPM models are the value workhorses, and the NM2000DC adds an on-board dust-control skirt and filter for cleaner air while you burnish.
| Model | Housing | Speed | Pad | Power Cord | Weight | Your Price |
|---|---|---|---|---|---|---|
| NM2000DC | Millennium (dust control) | 2,000 RPM | 20″ | 75 ft | 89 lb | $1,649 |
| NM2000 | Millennium | 2,000 RPM | 20″ | 75 ft | 89 lb | $1,399 |
| NM1600 | Millennium | 1,600 RPM | 20″ | 75 ft | 89 lb | $1,399 |
| C1600-3 | Classic Metal | 1,600 RPM | 20″ | 50 ft | 101 lb | $1,799 |
Burnishing Pads, Pad Driver & Accessories
This burnisher takes standard 20-inch burnishing pads on the Powr-Flite 20″ Flexible Pad Driver (X8862), which fits the whole Millennium (M) and Classic (C) burnisher series. Stock up on pads to match your finish: the Porko Plus 20″ burnishing pad (PP0520, 5-pack) for high-gloss spray buffing and the Combo 20″ burnishing pad (CB0520, 5-pack) for everyday maintenance shine. The motor carbon brushes are a wear part you can replace yourself — use the Carbon Brush for Burnishers (X8512) when the motor starts to spark or lose power. Not sure which pad grade suits your floor finish? Call 763-535-0770 and we will match it.
Shipping
Free shipping — this burnisher ships to your location at no added freight cost. Questions on delivery or setup? Call us at 763-535-0770.
Twin City Vacuum — Powr-Flite Commercial Dealer Since 1956
Twin City Vacuum has sold and serviced commercial floor equipment from our shop at 5415 West Broadway, Crystal, MN 55428 since 1956. We stock the full Powr-Flite burnisher line, the 20-inch pads and pad drivers that fit them, and we service what we sell. See the full manufacturer specifications on the Powr-Flite NM2000 product page, then call 763-535-0770 to confirm the right burnisher and pads for your floors.
Recommended Accessories & Consumables
The Powr-Flite NM2000 Millennium 20″ Burnisher spins pads at high speed — keep the right pad driver and burnishing pads on hand:
Powr-Flite 20 inch Flexible Pad Driver X8862 for M & C Series Burnishers — $268.99
Powr-Flite 20 inch Combo Burnishing Pad – 5 Pack CB0520 — $72.99
Powr-Flite Millennium Burnisher Dust-Control Filter 19069 — $80.99Frequently Asked Questions
What does the Powr-Flite NM2000 burnisher do?
The NM2000 is a 20-inch, 2,000 RPM high-speed electric burnisher. It spins a burnishing pad fast enough to bring finished hard floors — VCT, terrazzo, sealed concrete — to a high, durable gloss, using a 20-inch pad driver and pads selected for the finish.
Does the Powr-Flite NM2000 come with a pad driver and pads?
No. The NM2000 ships as the base machine, ready to run on 120V. The 20-inch flexible pad driver (X8862) and burnishing pads are ordered separately so you can match them to your floor finish. Call 763-535-0770 and we will spec them.
What size pads does the Powr-Flite NM2000 use?
The NM2000 uses 20-inch burnishing pads on the X8862 flexible pad driver. We stock Porko Plus (PP0520) high-gloss pads and Combo (CB0520) maintenance pads in 20-inch, 5-pack quantities.
How is the Powr-Flite NM2000 shipped, and how do I order?
The NM2000 burnisher ships free to your location by freight with no added delivery cost, assembled and ready to run. Order it on this page or call 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has sold and serviced Powr-Flite equipment since 1956 and can confirm the right burnisher and pads for your floors.
Reviews
There are no reviews yet