Powr-Flite NM2000DC Millennium 20 inch Dust-Control Burnisher (2,000 RPM)

The Powr-Flite NM2000DC burnisher is a 20-inch, 2,000 RPM high-speed electric floor burnisher with an integrated dust-control system. It delivers the same 2,000 RPM wet-look gloss as the NM2000, but a patented housing skirt and on-board filter capture the fine pad dust burnishing throws off — a real advantage in occupied schools, hospitals, and stores where air quality matters. The 1.5 HP motor and 75-foot cord keep it productive over big floors.

What Ships

The Powr-Flite NM2000DC burnisher ships as the base machine — motor, handle, deck, and the 75 ft power cord, assembled and ready to run on 120V. The 20-inch pad driver and burnishing pads are selected separately to match your floor finish (see below). Call 763-535-0770 and we will spec the driver and pad grades for you.

Powr-Flite NM2000DC Specifications

Powr-Flite Burnisher Comparison

All four Powr-Flite high-speed electric burnishers we stock, side by side. Every one drives a 20-inch pad; the Millennium models spin at up to 2,000 RPM for the highest wet-look gloss, the 1,600 RPM models are the value workhorses, and the NM2000DC adds an on-board dust-control skirt and filter for cleaner air while you burnish.

Burnishing Pads, Pad Driver & Accessories

This burnisher takes standard 20-inch burnishing pads on the Powr-Flite 20″ Flexible Pad Driver (X8862), which fits the whole Millennium (M) and Classic (C) burnisher series. Stock up on pads to match your finish: the Porko Plus 20″ burnishing pad (PP0520, 5-pack) for high-gloss spray buffing and the Combo 20″ burnishing pad (CB0520, 5-pack) for everyday maintenance shine. The dust-control system uses the Millennium Burnisher Dust-Control Filter (19069) — keep a spare on hand and change it when airflow drops. The motor carbon brushes are a wear part you can replace yourself — use the Powr-Flite Carbon Brushes (X8512) when the motor starts to spark or lose power. Not sure which pad grade suits your floor finish? Call 763-535-0770 and we will match it.

Shipping

Free shipping — this burnisher ships to your location at no added freight cost. Questions on delivery or setup? Call us at 763-535-0770.

Twin City Vacuum — Powr-Flite Commercial Dealer Since 1956

Twin City Vacuum has sold and serviced commercial floor equipment from our shop at 5415 West Broadway, Crystal, MN 55428 since 1956. We stock the full Powr-Flite burnisher line, the 20-inch pads and pad drivers that fit them, and we service what we sell. See the full manufacturer specifications on the Powr-Flite NM2000DC product page, then call 763-535-0770 to confirm the right burnisher and pads for your floors.

Recommended Accessories & Consumables

The Powr-Flite NM2000DC Millennium 20″ Dust-Control Burnisher spins pads at high speed — keep the right pad driver and burnishing pads on hand:

Powr-Flite 20 inch Combo Burnishing Pad – 5 Pack CB0520 — $72.99Powr-Flite Millennium Burnisher Dust-Control Filter 19069 — $80.99Powr-Flite 20 inch Flexible Pad Driver X8862 for M & C Series Burnishers — $268.99Tornado Brute Force 2000 High-Speed Burnisher — $1,499.00

Frequently Asked Questions

What does the Powr-Flite NM2000DC burnisher do?

The NM2000DC is a 20-inch, 2,000 RPM high-speed electric burnisher. It captures the fine pad dust that burnishing throws off through an on-board dust-control filter, and it spins a burnishing pad fast enough to bring finished hard floors — VCT, terrazzo, sealed concrete — to a high, durable gloss, using a 20-inch pad driver and pads selected for the finish.

Does the Powr-Flite NM2000DC come with a pad driver and pads?

No. The NM2000DC ships as the base machine, ready to run on 120V. The 20-inch flexible pad driver (X8862) and burnishing pads are ordered separately so you can match them to your floor finish. Call 763-535-0770 and we will spec them.

What size pads does the Powr-Flite NM2000DC use?

The NM2000DC uses 20-inch burnishing pads on the X8862 flexible pad driver. We stock Porko Plus (PP0520) high-gloss pads and Combo (CB0520) maintenance pads in 20-inch, 5-pack quantities.

How is the Powr-Flite NM2000DC shipped, and how do I order?

The NM2000DC burnisher ships free to your location by freight with no added delivery cost, assembled and ready to run. Order it on this page or call 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has sold and serviced Powr-Flite equipment since 1956 and can confirm the right burnisher and pads for your floors.