Rear Center Squeegee Blade 48308020
$78.99
Genuine OEM rear center squeegee blade (part# 48308020) for the Tornado BDSO 27/28. It is the centre section of the rear squeegee, where recovery is concentrated.
Genuine OEM rear center squeegee blade (part# 48308020) for the Tornado BDSO 27/28 stand-on scrubber. It is the centre section of the rear squeegee, the part of the assembly directly behind where the two scrub brushes are putting water down.
Position matters here. The centre of a squeegee sees the heaviest and most continuous flow of water, because the whole width of the machine’s solution is being channelled inward to this point by the front blade and the curve of the body. So the centre wears first, gets nicked first by debris travelling down the middle of the lane, and is the section that most often decides whether the floor behind the machine is dry.
The practical consequence is a wear pattern people misread. A squeegee that recovers well at the edges and leaves a wet line down the middle of the lane has a worn centre, not a vacuum problem and not an adjustment problem. Measure or look along the wiping edge rather than judging by the ends.
Check the centre at every squeegee inspection, which should be at every brush change. Look for a rounded wiping edge, nicks and tears, and hardening — old rubber stops conforming to floor undulations even when it still looks square. Also confirm the blade is seated evenly in its holder, because a pinch in the centre section leaves a gap exactly where you least want one.
Rotate to a fresh edge when the current one is rounded, and replace when the rubber is hard, torn, or has no usable edges left.
Compatible Models
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 26/27 — 99772
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado TS530-W26-U
- Tornado 99729 — TS550-W28-U
This part is shared across 6 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the squeegee drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the rear center squeegee blade (part# 48308020) do?
It is the centre section of the rear squeegee, directly behind where the brushes put water down. The front blade and the body curve channel water inward to this point, so it does the heaviest recovery.
My machine leaves a wet line down the middle of the lane. What is wrong?
Almost always a worn centre blade — not a vacuum problem and not an adjustment problem. The centre wears first because the whole width of the solution is channelled to it, so judge it by looking along the wiping edge rather than at the ends.
How often should I check it?
At every brush change. Look for a rounded wiping edge, nicks and tears, and hardening — old rubber stops conforming to floor undulations even when it still looks square — and check it is seated evenly in its holder.
How do I order the Rear Center Squeegee Blade (part# 48308020) or get help?
You can add the Rear Center Squeegee Blade (part# 48308020) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the rear center squeegee blade (part# 48308020) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet