Safety Pedal Spring 47210290

$57.99

Genuine OEM safety pedal spring (part# 47210290) for Tornado stand-on floor scrubbers. It is the return spring that lifts the safety pedal the instant the operator steps off.

Genuine OEM safety pedal spring (part# 47210290) for Tornado stand-on floor scrubbers — the machine list is below. It is the return spring on the foot board assembly that lifts the safety pedal back up when the operator’s weight comes off it.

This is the spring that makes presence detection actually work. The pedal going down is easy — an operator’s weight does that. The pedal coming back up, promptly and completely, is entirely this spring’s job, and that is the half that the safety function depends on. If the pedal does not rise far enough to release the microswitch, the machine can stay enabled after the operator has stepped off.

So treat a weak one as a safety fault rather than a nuisance. The warning signs are a pedal that returns slowly, returns part-way, or needs a nudge with a toe to come up; intermittent presence detection; or a machine that occasionally keeps running for a moment after dismount. Take the machine out of service until it is right.

Springs here fail by taking a set — losing free length and therefore force — rather than by snapping, and corrosion accelerates it because this spring lives in solution overspray and floor grit. Measure free length against a new one instead of judging by eye, and look for pitting on the coils, which is where fatigue cracks start. While the pedal is apart, check the pivot pin and the pedal support too: a binding pivot makes a healthy spring look weak, and fitting a new spring to a seized pivot fixes nothing.

This is the genuine Tornado spring at the correct rate and free length, so the pedal returns the way the interlock was designed around.

Compatible Models

This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the foot board drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the safety pedal spring (part# 47210290) do?

It returns the safety pedal to its raised position the moment the operator’s weight comes off. The pedal going down is done by the operator; the pedal coming back up — which is what releases the microswitch — is this spring’s job.

The pedal returns slowly or needs a nudge. Is that serious?

Yes. If the pedal does not rise far enough to release the microswitch, the machine can stay enabled after the operator has stepped off. Treat it as a safety fault and take the machine out of service until it is fixed.

The spring looks fine but the pedal still drags. What else should I check?

The pivot pin and the pedal support. A binding or dirt-packed pivot makes a healthy spring look weak, and fitting a new spring to a seized pivot fixes nothing. Also measure the spring’s free length against a new one — these fail by losing length, not by snapping.

How do I order the Safety Pedal Spring (part# 47210290) or get help?

You can add the Safety Pedal Spring (part# 47210290) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the safety pedal spring (part# 47210290) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Safety Pedal Spring 47210290”

Your email address will not be published. Required fields are marked *