Safety Switch Pedal 21513010

$10.99

Genuine OEM safety switch pedal (part# 21513010) for Tornado stand-on floor scrubbers. It is the foot pedal the operator stands on that tells the machine someone is aboard.

Genuine OEM safety switch pedal (part# 21513010) for Tornado stand-on floor scrubbers — compatible machines are listed below. It is the hinged pedal on the operator platform that the operator’s weight holds down, and it is the mechanical half of the presence-detection system: the pedal moves, the pedal presses the microswitch, and the microswitch tells the controller that someone is on the machine.

That makes it a safety part, not a convenience part. When the operator steps off, the pedal must rise far enough and fast enough to release the switch so drive and brush functions stop. A pedal that is cracked, bent, or binding in its pivot can hold the switch closed after the operator has left — which is the failure mode this whole system exists to prevent.

Symptoms that point here: the machine will not run even with someone standing on it (the pedal is not travelling far enough to make the switch); the machine keeps running after the operator steps off (the pedal is not returning); or the pedal feels gritty, stiff or sloppy underfoot. Slop usually means a worn pivot pin or support rather than the pedal itself, so check those together — the pedal, its pin and its return spring are one system and a new pedal on a worn pin will feel wrong immediately.

Inspect it at service. Look for cracks around the pivot and the pad area, for distortion from someone dropping a battery or a pallet on it, and for cleaning chemistry that has got into the pivot and dried. Clean and check free movement before deciding the switch is at fault.

This is the genuine Tornado pedal, dimensioned so its travel matches the switch’s operating point exactly.

Compatible Models

This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the foot board drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the safety switch pedal (part# 21513010) do?

It is the foot pedal on the operator platform. The operator’s weight holds it down, which presses the microswitch that tells the controller someone is aboard, so drive and brush functions are permitted.

The machine keeps running after I step off. Is this the pedal?

It can be. If the pedal is cracked, bent or binding in its pivot it may not rise far enough to release the switch. That is the exact failure this system exists to prevent, so take the machine out of service until it is fixed.

The pedal feels sloppy underfoot. Do I just need a new pedal?

Usually not just the pedal. Slop normally comes from a worn pivot pin or pedal support. The pedal, its pin and its return spring work as one system, so check all three — a new pedal on a worn pin will feel wrong straight away.

How do I order the Safety Switch Pedal (part# 21513010) or get help?

You can add the Safety Switch Pedal (part# 21513010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the safety switch pedal (part# 21513010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Safety Switch Pedal 21513010”

Your email address will not be published. Required fields are marked *