Screw M6 x 30 60130606

$1.99

Genuine OEM M6 x 30 mm screw (part# 60130606) for Tornado floor scrubbers. It is the mid-length M6 used where a bracket bolts through a deeper stack on the tank assembly.

Genuine OEM M6 x 30 mm screw (part# 60130606) for Tornado floor scrubbers — the machines it fits are listed below. On the solution tank assembly it fastens a bracket through a joint that is deeper than a plain two-plate sandwich.

The machine uses M6 at several lengths, and which one belongs in a given hole is not something to judge by eye — they are indistinguishable in a tray. The 30 mm length exists because at these positions the screw passes through more material, a spacer or a mounted component before it reaches thread. A shorter screw there engages too little thread for a joint that is carrying load; this one in a shallow or blind hole bottoms out, so the wrench reads tight while the joint is still loose.

On a tank assembly there is an additional reason to get the length right. Behind many of these mountings is a plastic moulding holding liquid. A screw that is too long can press into the tank wall, and the result is not an immediate leak but a stress point that cracks months later, usually when the tank is full.

Replace the screw when the hex or drive recess is rounded, when the thread is galled or damaged along any part of its length, when the shank is bent — roll it on something flat, since a bend stops the stack clamping square — or when there is a necked section below the head from over-tightening. Renew any lock washer that came off with it, and check the tapped hole before blaming the screw for a joint that will not stay tight.

Compatible Models

  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 26/30 — 99760
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 14 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the solution tank drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

Where is the screw (part# 60130606) used?

On the solution tank assembly, fastening a bracket through a joint deeper than a plain two-plate sandwich — through extra material, a spacer or a mounted component before it reaches thread.

Does it matter if I use a longer M6?

Yes, and more than usual here. Behind many of these mountings is a plastic moulding holding liquid. A screw that is too long presses into the tank wall and creates a stress point that cracks months later, usually when the tank is full.

The joint will not stay tight. What next?

Check the tapped hole and renew the lock washer before blaming the screw. Also roll the screw on something flat — a bend stops the stack clamping square and is easy to miss.

How do I order the Screw M6 x 30 (part# 60130606) or get help?

You can add the Screw M6 x 30 (part# 60130606) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the screw m6 x 30 (part# 60130606) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Screw M6 x 30 60130606”

Your email address will not be published. Required fields are marked *