Seeger Ring 61112801
$1.99
Genuine OEM Seeger ring (part# 61112801) for Tornado floor scrubbers. It is the sprung circlip that locates a bearing or shaft in the steering group, holding it at the right depth so nothing can walk out of position.
Genuine OEM Seeger ring (part# 61112801), used across a range of Tornado floor scrubbers — the full machine list is below. In the steering group it is the circlip that sits in a machined groove and axially locates a bearing or shaft, setting its position and stopping it migrating under load.
Seeger ring is the European name for what is often called a snap ring or circlip. It is spring steel, formed to a precise free diameter, and it works by trying to return to that diameter inside its groove. Everything about its performance comes from that spring temper, which is why fitting technique matters more than it looks.
Replace rather than reuse. Every installation opens or closes the ring past its working range, and after a cycle or two it has lost some of the force that keeps it seated. A ring that no longer sits fully home in its groove is a ring waiting to jump out, and when it does, a bearing moves and takes a shaft or a housing with it — an expensive failure from a part that costs almost nothing.
Inspect at every service where the groove is accessible. Replace any ring that is visibly distorted or no longer flat, that can be lifted out of its groove easily, that has rust in the spring section, or that shows bright wear where it has been moving against the part it retains. Check the groove too: a ring that has been working loose rounds its own groove edges, and a new ring in a damaged groove is not a repair.
Use the correct pliers to fit it, open it only as far as needed to clear the shaft or bore, and make sure it is fully seated all the way round before the assembly goes back together.
Compatible Models
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 9 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the steering wheel drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the Seeger ring (part# 61112801) do?
It is a sprung circlip sitting in a machined groove that axially locates a bearing or shaft in the steering group, setting its position and preventing it from migrating under load.
Can I reuse a Seeger ring?
No. Every installation stretches the ring past its working range and it loses some of the spring force that keeps it seated. A ring that no longer sits fully home will eventually jump out, and when it does a bearing moves and takes a shaft or housing with it.
How do I know if one needs replacing?
Replace it if it is distorted or no longer flat, lifts out of its groove easily, has rust in the spring section, or shows bright wear where it has been moving. Inspect the groove as well — a ring that has been loose rounds its own groove edges.
How do I order the Seeger Ring (part# 61112801) or get help?
You can add the Seeger Ring (part# 61112801) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the seeger ring (part# 61112801) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet