Slotted Cam Washer X8028

$3.99

Genuine OEM slotted cam washer (part# X8028) for Tornado and Powr-Flite commercial high-speed burnishers — the washer that sits under the handle cam lever and takes its clamping load. Fits all Tornado Brute Force burnishers (see full list below).

The X8028 is the slotted cam washer in the handle clamp group of the Brute Force burnishers. It appears on every drawing in the book, on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B), and on the current and earlier Brute Force 2000 Dust Control (98486) drawings, next to the cam lever assembly (X1184) and the handle lock clamp (X1456).

The slot is the whole point. A plain washer would turn with the lever and scrub its seat; the slot lets the washer stay put while the cam rotates against it, so the wear is concentrated on a cheap washer instead of on the lever or the clamp behind it. That makes it a deliberate sacrificial part — the one in the handle clamp group designed to wear out first.

Replace the X8028 when its face is grooved, galled or dished, when the slot has spread so the washer can rotate, or any time you fit a new cam lever or handle lock clamp. The failure mode to recognise is a handle that holds for a week after a new lever is fitted and then starts creeping again: the new lever is bedding into a worn washer, and the cheap part that should have been changed with it is now wearing out the expensive one.

Because it costs a few dollars and sits in the same load path as a lever, a clamp and a brace that cost far more, it is the part to change on sight rather than on inspection. The washer is shared across the whole Brute Force burnisher line and carries no model name. Call 763-535-0770 with your model and serial number if you want the handle clamp set listed. It is a shared part used across Tornado and Powr-Flite machines — see the full list of models below.

Compatible Models

  • Tornado models:
  • Powr-Flite models:
    • B171
    • B172
    • B201
    • B202
    • C131
    • C171HD
    • C172
    • C201HD
    • C202
    • NM1600
    • NM171HD
    • NM171SD
    • NM2000
    • NM2000DC
    • NM201HD
    • NM202

Frequently asked questions

What does the slotted cam washer (part# X8028) do on a burnisher?

It sits under the handle cam lever and takes the lever’s clamping and rubbing load. The slot keeps the washer from rotating with the cam, so wear lands on the washer rather than on the lever or clamp.

How do I know if my X8028 cam washer needs replacing?

Replace it if the face is grooved, galled or dished, or if the slot has spread so the washer can turn. Fit a new one with any new cam lever or handle lock clamp.

Why does my handle start creeping again shortly after a new cam lever?

Because the new lever is bedding into a worn cam washer. Changing the X8028 at the same time as the lever prevents it — it is a few dollars against a lever, clamp and brace.

What models is the slotted cam washer (part# X8028) compatible with?

All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).

How do I order the slotted cam washer (part# X8028) or get help?

You can add the slotted cam washer (part# X8028) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Reviews

There are no reviews yet

Be the first to review “Slotted Cam Washer X8028”

Your email address will not be published. Required fields are marked *