Solution Tank Cap with Hose Assembly V1710010
$100.99
Genuine OEM solution tank cap with hose assembly (part# V1710010) for Tornado floor scrubbers. It is the cap supplied complete with its attached hose.
Genuine OEM solution tank cap with hose assembly (part# V1710010) for Tornado floor scrubbers — the machines it fits are listed below. It is supplied as a complete unit: the cap together with the hose that attaches to it, which is how it should be replaced, because the joint between the two is part of the assembly and not something to improvise with a generic hose and a clamp.
The cap seals the tank opening and keeps debris out of the clean water — everything that gets into a solution tank ends up at the filter screen, the valve seat and the brush outlets. The hose attached to it does the second half of the job, routing flow or venting where the machine needs it rather than straight out of the top of the tank.
Because this is a cap, it gets handled constantly, and the failures reflect that. The body cracks when it is dropped on concrete. Threads or lugs distort or strip when it is forced on misaligned. The hose end hardens with age and chemical exposure until the joint weeps, or the hose splits where it is repeatedly flexed as the cap is turned. And caps get lost, which is worth planning for: keeping a spare on the shelf is cheaper than a machine standing idle or running with the tank open.
Replace the assembly rather than trying to rehose an old cap: a hardened cap spigot will not seal a new hose, and the leak that follows puts water where the machine’s electrics are.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 2 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the solution tank drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the cap with hose assembly (part# V1710010) do?
It seals the solution tank opening and carries the attached hose that routes flow or venting where the machine needs it. It is supplied as a complete unit.
Can I just fit a new hose to my existing cap?
Better not to. A cap spigot that has hardened with age will not seal a new hose properly, and the leak that follows puts water where the machine’s electrics are. The joint between cap and hose is part of the assembly.
How do these fail?
A cracked body from being dropped on concrete, threads or lugs distorted from being forced on misaligned, a hardened hose end that weeps, or a hose split where it flexes as the cap is turned. They also simply get lost — worth keeping a spare.
How do I order the Solution Tank Cap with Hose Assembly (part# V1710010) or get help?
You can add the Solution Tank Cap with Hose Assembly (part# V1710010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the solution tank cap with hose assembly (part# V1710010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet