Tornado BDSO 27/28 Rear Squeegee Rubber 37.60 x 3.54 x 0.19 in. 48415010

$63.99

Genuine OEM rear squeegee rubber (part# 48415010) for the Tornado BDSO 27/28, 37.60 in. x 3.54 in. x 0.19 in. It is the wiping edge that seals the vacuum path and pulls water off the floor.

Genuine OEM rear squeegee rubber (part# 48415010) for the Tornado BDSO 27/28 stand-on scrubber, measuring 37.60 inches long by 3.54 inches wide by 0.19 inches thick.

The rear blade does the actual recovery. It has to seal against the floor across its whole length so the vacuum can lift water rather than air, and it has to do that while being dragged over a surface at walking speed. Everything else in the recovery system — the vacuum motor, the hoses, the tank lid seal — is working to support what this strip of rubber is doing at the floor.

Which is why a streak behind the machine is a blade problem far more often than a suction problem. The usual causes are a rounded wiping edge that no longer wipes, a nick from running over debris that leaves a permanent gap, hardening with age so the blade stops conforming to floor undulations, and uneven wear that means the blade seals on one side and not the other.

The economy of squeegee rubber is worth knowing: both long edges are usable, and most blades have four usable wiping edges in total if the blade can be turned end for end as well as flipped. Rotating to a fresh edge when the current one rounds off costs minutes and roughly doubles or quadruples the life you get from the part. Check for that at the same interval you check brushes.

Replace rather than rotate when the rubber has gone hard, when it is nicked or torn anywhere along the wiping edge, or when all usable edges are rounded. Check the blade is seated evenly in its holder, with no waves along its length, and check the squeegee’s own deflection across the floor — a perfect blade in a bent squeegee still streaks.

Compatible Models

See where this part sits on the machine on the squeegee drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the rear squeegee rubber (part# 48415010) do?

It is the wiping edge that seals against the floor across the full width of the squeegee so the vacuum can lift water instead of air. It does the actual water recovery.

My machine leaves a streak of water. Is it suction or the blade?

Far more often the blade. Look for a rounded wiping edge, a nick from running over debris, rubber that has hardened and stopped conforming to the floor, or uneven wear that seals on one side only.

Can I get more life out of a squeegee rubber?

Yes. Both long edges are usable, and most blades give four usable wiping edges in total if they can be turned end for end as well as flipped. Rotating to a fresh edge takes minutes and multiplies the life of the part.

How do I order the Rear Squeegee Rubber (part# 48415010) or get help?

You can add the Rear Squeegee Rubber (part# 48415010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the rear squeegee rubber 37.60 x 3.54 x 0.19 in. (part# 48415010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Tornado BDSO 27/28 Rear Squeegee Rubber 37.60 x 3.54 x 0.19 in. 48415010”

Your email address will not be published. Required fields are marked *