Tornado BDSO 27/28 Spotlight 63710031
$118.99
Genuine OEM spotlight (part# 63710031) for the Tornado BDSO 27/28. It is the forward-facing work light that shows the floor ahead of the machine.
Genuine OEM spotlight (part# 63710031) for Tornado floor scrubbers — compatible machines are listed below. It is the forward-facing work light on the machine.
Scrubbing happens when buildings are empty, which usually means lights are partly off: a warehouse on night setting, a retail floor after close, a loading area with the shutters down. The spotlight is what lets the operator see the floor immediately ahead — a spill, a dropped pallet strap, a change in surface, a cable across an aisle. It also makes the machine visible to anyone else working in the space, which on a quiet, fast-moving stand-on machine is worth something on its own.
So treat a failed light as a defect rather than cosmetic. Whether it is formally required depends on the site, but an operator who cannot see what is under the squeegee is an operator who will eventually run over something that damages the machine.
Lights fail from vibration and water. Filament or LED elements die; a seal perishes and moisture gets in, which fogs the lens and corrodes the terminals; and the lens itself crazes with age and chemical exposure until the output is scattered and useless even though the lamp still works.
Before replacing, check the supply and the connector: a corroded terminal behind the light gives exactly the intermittent that gets blamed on the lamp, and it is a far cheaper fix. Check the switch and fuse too.
Fit it with its seal correctly seated — a light that fills with water fails again quickly.
Compatible Models
See where this part sits on the machine on the electrical layout drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the spotlight (part# 63710031) do?
It lights the floor immediately ahead of the machine, which matters because scrubbing usually happens when a building is empty and the lights are partly off. It also makes a quiet, fast stand-on machine visible to anyone else in the space.
My light is intermittent. Is the lamp failing?
Check the supply and connector first. A corroded terminal behind the light gives exactly that symptom and is a far cheaper fix. Check the switch and fuse as well before replacing the unit.
The lamp works but the output seems poor. Why?
Usually a crazed lens, which scatters the light, or moisture inside fogging it. Both come from age, chemical exposure and a perished seal. Fit a replacement with its seal correctly seated, or it will fill with water and fail again quickly.
How do I order the Spotlight (part# 63710031) or get help?
You can add the Spotlight (part# 63710031) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the spotlight (part# 63710031) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet