Tornado BDSO 27/28 Squeegee Body 48215010

$671.99

Genuine OEM squeegee body (part# 48215010) for the Tornado BDSO 27/28. It is the frame that carries the blades, holds the vacuum pocket and mounts to the machine.

Genuine OEM squeegee body (part# 48215010) for the Tornado BDSO 27/28 stand-on scrubber. It is the curved frame that carries the front and rear blades, forms the vacuum pocket between them, and mounts the whole assembly to the machine.

The body is what makes blades work. It sets the curve that keeps the blade in contact across its full width, it holds the two blades at the right spacing so the pocket between them can hold a column of water, and it provides the duct the vacuum pulls through. A blade is only as good as the frame holding it.

That is why a bent or cracked body produces symptoms that look like blade problems and resist blade replacement. If the frame has been forced — reversed into a pallet, caught on a dock plate, dropped — the curve changes, and the blade then lifts off the floor somewhere along its length. The operator sees a streak that comes back within days of fitting new rubber, which is the signature of a frame problem rather than a wear problem.

Other things to look for: cracks around the mounting points and the pivot, where the loads concentrate; distortion of the blade channels, which pinches a blade in one place and lets it stand proud in another; and damage to the vacuum port or its seal face, which costs lift everywhere.

Inspect it any time the machine has taken an impact at the back, and any time new blades do not fix a streak. Lay a straight edge along the blade channel and look for daylight — that single check settles most arguments about whether it is the rubber or the frame.

Compatible Models

See where this part sits on the machine on the squeegee drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the squeegee body (part# 48215010) do?

It carries the front and rear blades, sets the curve that keeps them in contact across the full width, holds the vacuum pocket between them, and mounts the assembly to the machine.

I fitted new blades and the streak came back within days. Why?

That is the signature of a bent or distorted body rather than worn rubber. If the frame has been forced, the curve changes and the blade lifts off the floor somewhere along its length no matter how new it is.

How do I check the body?

Lay a straight edge along the blade channel and look for daylight — that one check settles most arguments about rubber versus frame. Also look for cracks around the mounting points and pivot, distorted blade channels, and damage to the vacuum port seal face.

How do I order the Squeegee Body (part# 48215010) or get help?

You can add the Squeegee Body (part# 48215010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the squeegee body (part# 48215010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Tornado BDSO 27/28 Squeegee Body 48215010”

Your email address will not be published. Required fields are marked *