Vacuum Motor Coupler 20810040

$5.99

Genuine Tornado vacuum motor coupler (part# 20810040) — fits 19 Tornado scrubber models including the BDSO 27/28. Seals the vacuum motor to the recovery tank airway.

Genuine Tornado vacuum motor coupler, part number 20810040, used on 19 Tornado scrubber models including the BDSO 27/28. The coupler is the flexible connector between the vacuum motor inlet and the recovery tank airway. It has to seal against a pressure difference while absorbing the vibration the motor produces, and it is one of the cheapest parts on a scrubber.

It is also one of the most common causes of weak pickup, for exactly the reason its job description suggests. Rubber that has hardened with age and heat stops conforming to the two faces it sits between, and the vacuum bleeds through the gap. Because the leak is inside the machine, nobody sees it; what they see is a scrubber that leaves water behind with new blades, a clean filter and a healthy motor.

Check it by feel and by eye with the motor assembly out. A good coupler is pliable and springs back; one that has gone hard, taken a permanent set, or cracked at the fold needs replacing. Replace it any time the vacuum motor comes out for any other reason — it costs a few dollars and you already have the machine apart.

Call 763-535-0770 if you are working through a weak-pickup fault and want the order to check things in; the coupler, the tank lid gasket and the squeegee hose account for most of them.

Compatible Models

  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BR 28/30 — 99765
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 18 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the vacuum drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the vacuum motor coupler do?

It is the flexible connector that seals the vacuum motor inlet to the recovery tank airway while absorbing motor vibration.

How do I know if the coupler is the cause of weak pickup?

With the motor assembly out, flex the coupler. A good one is pliable and springs back; one that has hardened, taken a permanent set or cracked at the fold is leaking vacuum inside the machine where you cannot see it.

What models is the vacuum motor coupler (part# 20810040) compatible with?

Tornado lists it on 19 machines, including the BDSO 27/28 stand-on scrubber. The full list is above.

How do I order the vacuum motor coupler (part# 20810040) or get help?

You can add the vacuum motor coupler (part# 20810040) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the vacuum motor coupler (part# 20810040) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Vacuum Motor Coupler 20810040”

Your email address will not be published. Required fields are marked *