Vacuum Motor Exhaust Hose 32 x 200 47610300
$4.99
Genuine OEM vacuum motor exhaust hose (part# 47610300), 32 mm bore by 200 mm long, for Tornado floor scrubbers. It carries the vacuum motor’s hot exhaust air away from the motor and out of the machine.
Genuine OEM vacuum motor exhaust hose (part# 47610300), 32 mm bore by 200 mm long, for Tornado floor scrubbers — see the machine list below. It connects to the vacuum motor exhaust with a clamp and an elbow fitting and routes the motor’s outgoing air away to where it can leave the machine.
Exhaust routing matters more on a scrubber than people expect. The air coming off a vacuum motor is hot and it carries a fine mist of whatever made it through the separator. Ducting it properly keeps that heat out of the motor compartment, keeps damp air away from electrical connections, and stops the motor recirculating its own warm exhaust — which raises its running temperature and shortens its life.
This hose fails from heat and from being in the way. It hardens and goes brittle near the motor end, splits along a crease where it has been bent tightly, pulls off its fitting when a clamp loosens, or gets crushed when something is dropped into the compartment during service. Watch for a motor compartment that runs noticeably hotter than it used to, a new whistling or rushing noise from the motor area, or visible splits, collapse or soot-like residue around the joint.
Replace it on sight when the old hose is hard, cracked or deformed — a 32 mm hose is cheap and the motor it protects is not. Fit it with a new clamp if the old clamp has lost its spring or corroded, and route it along its original path without kinks; a crushed exhaust is close to a blocked one, and a blocked exhaust puts all that heat straight back into the motor.
This is the genuine Tornado part in the correct bore and length, so it reaches its fittings without strain and keeps the exhaust path the machine was designed with.
Compatible Models
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
This part is shared across 4 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the vacuum drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What size is the vacuum motor exhaust hose (part# 47610300)?
It is 32 mm bore by 200 mm long, matched to the vacuum motor exhaust fitting and the routing on the machines it fits.
What does it do?
It carries the vacuum motor’s hot exhaust air away from the motor and out of the machine, keeping heat out of the motor compartment, keeping damp air away from electrical connections, and stopping the motor from recirculating its own warm exhaust.
How do I know if the exhaust hose (part# 47610300) needs replacing?
Look for a motor compartment running hotter than it used to, a new whistling or rushing noise from the motor area, or a hose that is hardened, cracked, split along a bend, collapsed, or pulled off its fitting. Replace it on sight once it has gone hard.
How do I order the Vacuum Motor Exhaust Hose 32 x 200 (part# 47610300) or get help?
You can add the Vacuum Motor Exhaust Hose 32 x 200 (part# 47610300) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the vacuum motor exhaust hose 32 x 200 (part# 47610300) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet