Vacuum Motor Gasket 48115010

$9.99

Genuine OEM vacuum motor gasket (part# 48115010) for Tornado floor scrubbers. It seals the vacuum motor to its mounting so all the suction the motor makes is pulled through the squeegee instead of leaking in around the motor.

Genuine OEM vacuum motor gasket (part# 48115010) for Tornado floor scrubbers — see the machine list below. It seals the joint between the vacuum motor and its mounting base, and its job is simple: make sure the air the motor moves comes through the squeegee rather than in around the edges of the motor.

A vacuum system is only as good as its weakest seal. A motor can be in perfect condition and the machine will still leave water behind if air is bypassing the recovery circuit at this joint, because the motor happily pulls its air from the path of least resistance. That is why lost suction with a healthy-sounding motor so often turns out to be a gasket rather than anything expensive.

This gasket hardens with heat. The motor runs warm, the gasket is squeezed between the motor and its base, and over a few seasons it goes from compliant to stiff, then takes a permanent set, then cracks. Signs to look for: reduced suction with good blades and seals, a hiss around the motor when it runs, a gasket that has gone shiny and hard, visible cracking or chunks missing, or a gasket that has flattened so far the motor sits lower than it should.

Always fit a new gasket when the vacuum motor comes out, whatever the old one looks like. It costs very little and it is the only chance to seal that joint properly. Clean both faces before fitting — a crumb of old gasket or a ridge of dried detergent residue will hold the new one open just enough to leak. Do not use sealant in place of the gasket; the motor has to come out again one day.

This is the genuine Tornado part in the correct material and thickness, so the motor sits at the designed height and the seal is right from the first run.

Compatible Models

  • Tornado 18″ BR 18/11 — 99685
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado TS550-W28-U — 99729
  • Tornado BD 32/26 — 99732
  • Tornado BD 26/27 — 99770
  • Tornado BD 26/27 — 99772
  • Tornado BR 28/27 — 99775
  • Tornado BD 33/30 — 99780
  • Tornado BR 33/30 — 99785
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U
  • Tornado 99729 — TS550-W28-U

This part is shared across 16 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the vacuum drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the vacuum motor gasket (part# 48115010) do?

It seals the vacuum motor to its mounting base so the motor pulls its air through the squeegee and the recovery circuit rather than leaking it in around the motor itself.

How do I know if the vacuum motor gasket (part# 48115010) needs replacing?

Reduced suction with good squeegee blades and sound tank seals is the main sign, often with a hiss around the motor while it runs. Inspect the gasket for hardening, a shiny glazed surface, cracks, missing chunks, or flattening that lets the motor sit low.

Should I replace it whenever the motor comes out?

Yes, always. It is inexpensive, it is the only opportunity to seal that joint properly, and a reused gasket that has taken a set will leak. Clean both faces first and do not substitute sealant for the gasket.

How do I order the Vacuum Motor Gasket (part# 48115010) or get help?

You can add the Vacuum Motor Gasket (part# 48115010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the vacuum motor gasket (part# 48115010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Vacuum Motor Gasket 48115010”

Your email address will not be published. Required fields are marked *