Washer 60305002
$1.99
Genuine OEM washer (part# 60305002) for Tornado floor scrubbers. It spreads fastener load at a mounting on the scrub head.
Genuine OEM washer (part# 60305002) for Tornado floor scrubbers — compatible machines are listed below. On the brush base it goes under the head or nut of a fastener at a deck mounting.
The purpose of a flat washer is to turn a point load into a spread one. Without it, the small bearing area under a fastener head concentrates the clamp force into whatever it is sitting on, and on sheet metal or a soft casting that means a dent — after which the joint has lost its tension and will be loose again regardless of how carefully it was torqued. The washer also gives the fastener a flat, smooth surface to turn against, so the torque applied becomes clamp load instead of friction against a rough or painted seat.
It is worth noting that the brush base uses several washers with different part numbers, in different sizes and materials. They are not interchangeable: outside diameter determines how far the load spreads, thickness forms part of the stack height the assembly is built around, and material is chosen for the exposure at that position. Order by number.
Washers get left out of reassemblies more often than any other part, so count them back in. Replace rather than reuse one that is dished, cracked, burred around the bore, or badly scored on its bearing face — dishing in particular means the washer has already yielded and will not hold the load it did when new.
Compatible Models
- Tornado BD14/4 Disc Brush Autoscrubber — 99414
- Tornado 17″ BD 17/6 Automatic Scrubber — 99617
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 28/20 — 99728
- Tornado BD 32/26 — 99732
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado 99694 — TS350-W20-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
This part is shared across 12 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the brush base drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the washer (part# 60305002) do?
It turns the fastener’s point load into a spread one so the head does not dent the sheet metal or casting under it, and gives the fastener a flat, smooth face to turn against so torque becomes clamp load.
The brush base shows several washers. Can I swap them?
No. Outside diameter sets how far the load spreads, thickness is part of the stack height the assembly is built around, and the material is chosen for the exposure at that position. Order by part number.
When should a washer be replaced?
When it is dished, cracked, burred around the bore, or badly scored on its bearing face. Dishing means it has already yielded and will not hold the load it did when new.
How do I order the Washer (part# 60305002) or get help?
You can add the Washer (part# 60305002) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the washer (part# 60305002) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet