Washer INOX 60305006

$1.99

Genuine OEM stainless washer (part# 60305006) for Tornado floor scrubbers. It spreads fastener load on the brush deck, where a plated washer would rust into the joint.

Genuine OEM stainless (INOX) washer (part# 60305006) for Tornado floor scrubbers — the machines it fits are listed below. It goes under fastener heads and nuts on the brush base transmission and at other positions on the machine where the joint stays wet.

Mechanically it does what every flat washer does: spreads the clamping load over a wider bearing area so the fastener head does not dig into the bracket, and gives the head or nut a smooth, flat face to turn against so the joint reaches its proper tension instead of feeling tight against a rough seat. Both matter more on thin sheet and on soft castings than people expect — a fastener that has pulled a dent into its mounting is the usual reason a joint goes loose a week after it was tightened.

The material is the point of this particular washer. The brush deck gets solution all day and a hose at the end of the shift. A plated washer there loses its coating at the first wrench mark and then rusts, swelling and bonding the stack together, so the next service turns three fasteners into an afternoon. There is a second reason to match materials: a plated washer under a stainless screw forms a galvanic pair in constant moisture, and the less noble part corrodes faster than either would alone.

Replace a washer that is dished, cracked, burred around the bore, or badly scored on its bearing face. Dishing means it has already yielded and will not clamp as designed. Renew washers with the fastener rather than putting a tired one back into a serviced joint.

This is the genuine Tornado part in the correct bore, outside diameter, thickness and material.

Compatible Models

  • Tornado BD14/4 Disc Brush Autoscrubber — 99414
  • Tornado 17″ BD 17/6 Automatic Scrubber — 99617
  • Tornado 20″ BD 20/11 — 99680
  • Tornado TS350-W20-U — 99694
  • Tornado BR 22/14 — 99695
  • Tornado BD 26/14 — 99720
  • Tornado BD 26/26 — 99726
  • Tornado BD 28/20 — 99728
  • Tornado BD 32/26 — 99732
  • Tornado BD 33/30 — 99780
  • Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
  • Tornado BD 40/66 — 99790
  • Tornado BR 40/66 — 99795
  • Tornado Formerly 99680L — TS120-S45-U
  • Tornado 99680blt — TS120-S53-U
  • Tornado BDSO 20/21 — TS120-S59-U
  • Tornado 99694 — TS350-W20-U
  • Tornado TS530-W26-U
  • Tornado TS530-W30-U

This part is shared across 19 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.

See where this part sits on the machine on the brush base transmission drawing, or browse every Tornado BDSO 27/28 parts diagram.

Frequently Asked Questions

What does the washer (part# 60305006) do?

It spreads the fastener’s clamping load over a wider area and gives the head or nut a smooth, flat face to turn against, so the joint reaches proper tension and the fastener does not dent its mounting.

Why does it need to be stainless?

Because the brush deck gets solution all day and a hose at the end of the shift. A plated washer loses its coating at the first wrench mark, then rusts, swells and bonds the stack together — and under a stainless screw it also forms a galvanic pair that corrodes faster still.

When should it be replaced rather than reused?

When it is dished, cracked, burred around the bore, or badly scored on its bearing face. Dishing means it has yielded and will not clamp as designed, so renew washers with the fastener rather than reusing them in a serviced joint.

How do I order the Washer INOX (part# 60305006) or get help?

You can add the Washer INOX (part# 60305006) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the washer inox (part# 60305006) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.

Reviews

There are no reviews yet

Be the first to review “Washer INOX 60305006”

Your email address will not be published. Required fields are marked *