Washer INOX 60308010
$1.99
Genuine OEM stainless washer (part# 60308010) for Tornado floor scrubbers. It is the most widely used washer on the scrub head, appearing at six callouts on the drawing.
Genuine OEM stainless (INOX) washer (part# 60308010) for Tornado floor scrubbers — the machines it fits are listed below. On the brush base it is the washer used at more positions than any other, which makes it the one worth keeping a handful of on the van: a scrub head rebuild uses several, and they are the item most often found missing when a joint will not hold.
Its job is the standard one and it matters at every one of those positions: spread the fastener’s clamping load over a wider bearing area so the head or nut does not sink into the part it is holding, and provide a flat, smooth face for the fastener to turn against so the joint reaches proper tension instead of feeling tight against a rough seat.
Washers are also the part most likely to be quietly left out on reassembly, and the consequence turns up later as a joint that will not stay tight or a bracket that has a dent where the fastener head sat. Count them back in when a head goes together.
The material is specified for the environment. The scrub head is the wettest part of a scrubber — solution goes down right in front of it and the brushes throw it everywhere — so a plated washer loses its coating at the first wrench mark, then rusts and welds the stack together, and under a stainless fastener it forms a galvanic pair that corrodes faster still.
Replace a washer that is dished, cracked, burred around the bore, or badly scored on its bearing face. Dishing means it has yielded and will not clamp as designed.
Compatible Models
- Tornado 30″ FK3000 Floorkeeper Automatic – Series C — 99430
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 22/14 — 99690
- Tornado TS350-W20-U — 99694
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/30 — 99760
- Tornado BR 28/30 — 99765
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado Formerly 99680L — TS120-S45-U
- Tornado 99680blt — TS120-S53-U
- Tornado 99694 — TS350-W20-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 27 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the brush base drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
Where is the washer (part# 60308010) used?
At more positions on the brush base than any other washer — six callouts on the drawing. A scrub head rebuild uses several, so it is worth keeping a handful on the van.
Does it matter if one gets left out?
Yes, and they are the part most often quietly omitted. The consequence shows up later as a joint that will not stay tight, or a bracket with a dent where the fastener head sat. Count them back in when a head goes together.
Why stainless rather than plated?
The scrub head is the wettest part of the machine. A plated washer loses its coating at the first wrench mark, then rusts and welds the stack together — and under a stainless fastener it also forms a galvanic pair that corrodes faster still.
How do I order the Washer INOX (part# 60308010) or get help?
You can add the Washer INOX (part# 60308010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the washer inox (part# 60308010) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet