Washer M3 60303002
$1.99
Genuine OEM M3 washer (part# 60303002) for Tornado floor scrubbers. It spreads the load under the small screws and nuts that hold switches and light components in place.
Genuine OEM M3 washer (part# 60303002) for Tornado floor scrubbers — compatible machines are listed below. It goes under the head or the nut of the M3 fastenings that secure switches, clips and small components on the foot board and at several other positions on the machine.
A flat washer does a simple job well: it spreads the fastener’s clamping load over a larger area and gives the nut or screw head a smooth, flat surface to turn against. At M3 both halves of that matter. The clamping area under a tiny screw head is small enough that without a washer it can dig into a plastic housing or a thin bracket, and the dent it leaves is why the fastening feels loose a week later even though nobody touched it. The smooth bearing surface matters because galling or a rough seat under the head is what makes a small fastener feel tight before it actually is.
Washers are easy to lose and easy to leave out, and they get left out more often than any other part on a service. It is worth counting them back in. A missing washer at a switch mounting can let the component shift under vibration, and anything that moves a switch moves the point at which it operates.
Replace a washer that is dished, cracked, burred around the bore, or corroded enough to have lost its flat face. A dished washer has already yielded and will not hold the load it did when it was new. Replace them in sets where several share a fastening.
This is the genuine Tornado part in the correct bore, outside diameter and thickness, so stacked heights come out as the assembly expects.
Compatible Models
- Tornado BD14/4 Disc Brush Autoscrubber — 99414
- Tornado 20″ BD 20/11 — 99680
- Tornado 18″ BR 18/11 — 99685
- Tornado BD 22/14 — 99690
- Tornado BR 22/14 — 99695
- Tornado BD 26/14 — 99720
- Tornado BD 26/26 — 99726
- Tornado BD 28/20 — 99728
- Tornado TS550-W28-U — 99729
- Tornado BD 32/26 — 99732
- Tornado BD 26/27 — 99770
- Tornado BD 26/27 — 99772
- Tornado BR 28/27 — 99775
- Tornado BD 33/30 — 99780
- Tornado BR 33/30 — 99785
- Tornado BDSO 27/28 Stand-On Scrubber — 99786 / 99786C
- Tornado BD 40/66 — 99790
- Tornado BR 40/66 — 99795
- Tornado 99680blt — TS120-S53-U
- Tornado BDSO 20/21 — TS120-S59-U
- Tornado TS530-W26-U
- Tornado TS530-W30-U
- Tornado 99729 — TS550-W28-U
This part is shared across 23 Tornado machines. If your machine is not listed, call 763-535-0770 and we will check it for you.
See where this part sits on the machine on the foot board drawing, or browse every Tornado BDSO 27/28 parts diagram.
Frequently Asked Questions
What does the M3 washer (part# 60303002) do?
It spreads the clamping load of a small screw or nut over a larger area and gives the head a smooth, flat surface to turn against — which stops the fastener digging into a plastic housing or thin bracket.
Does leaving a washer out really matter?
Yes, and they get left out more often than any other part. Without one, a tiny screw head digs in and the fastening feels loose a week later. At a switch mounting that lets the component shift under vibration, which moves the point at which the switch operates.
When should an M3 washer be replaced rather than reused?
When it is dished, cracked, burred around the bore, or corroded enough to have lost its flat face. A dished washer has already yielded and will not hold the load it did when new.
How do I order the Washer M3 (part# 60303002) or get help?
You can add the Washer M3 (part# 60303002) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
Manufacturer specifications for the Tornado BDSO 27/28 stand-on scrubber are published by Tornado Industries at tornadovac.com. If you are not certain the washer m3 (part# 60303002) is the right part for your machine, call Twin City Vacuum at 763-535-0770 or stop in at 5415 West Broadway, Crystal, MN 55428 — we have been servicing commercial floor equipment since 1956.






Reviews
There are no reviews yet