Tornado Wheel 4 in. x 1-1/2 in. X8935
$35.99
Genuine OEM 4 in. x 1-1/2 in. wheel (part# X8935) for Tornado commercial high-speed burnishers — the wide transport wheel used on all three Brute Force burnishers (see full list below).
The X8935 is a 4 inch diameter by 1-1/2 inch wide wheel. It appears on every drawing in the Brute Force burnisher book, on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B), and on both Brute Force 2000 Dust Control (98486) drawings. The drawings also list a 5 inch by 1-1/4 inch wheel (X8024) at a different position, so check the callout: the two differ in both diameter and width and are not interchangeable. It is a shared part used across Tornado machines — see the full list of models below.
The extra width is the point of this wheel. A wider tread spreads the machine’s weight over more floor, which matters on soft or freshly finished surfaces where a narrow wheel can leave a mark, and it gives better stability when a heavy burnisher is tilted back and rolled.
Replace the X8935 when the tread is flat-spotted, chunked, cracked or worn thin, when the bore has worn oval so the wheel wobbles on its axle, or when it no longer rolls freely. Flat spots come from leaving a machine parked in one position for weeks; a thump felt through the handle on every wheel revolution is the symptom. A wheel that has seized is more damaging than one that is worn, because it stops rolling and starts wearing the axle instead.
Replace wheels in pairs so the machine sits level, and inspect the axle at the same time — a worn axle will ruin new wheels quickly. The 98458B and 98482B use a 13-3/4 inch axle (X8936) and the 98486 drawings list a 13-3/4 inch axle as X1460, so order the axle by callout rather than by description. The wheel is shared across the Brute Force line and carries no model name. Call 763-535-0770 if you want the wheel and axle set listed for your machine.
Compatible Models
- Tornado models:
- Brute Force 1600 — 98458B
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- Brute Force 2000 High-Speed Glazer with Dust Control — 98486
Frequently asked questions
What does the 4 in. x 1-1/2 in. wheel (part# X8935) do on a burnisher?
It is a transport wheel. Its wider tread spreads the machine’s weight over more floor and gives better stability when the burnisher is tilted back and rolled.
How do I know if my X8935 wheel needs replacing?
Replace it if the tread is flat-spotted, chunked, cracked or worn thin, if the bore has worn oval so the wheel wobbles, or if it no longer rolls freely. A thump through the handle every revolution means a flat spot.
What is the difference between the X8935 and the X8024 wheel?
The X8935 is 4 inches in diameter and 1-1/2 inches wide; the X8024 is 5 inches by 1-1/4 inches. They sit at different callouts and are not interchangeable.
What models is the 4 in. x 1-1/2 in. wheel (part# X8935) compatible with?
All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).
How do I order the wheel (part# X8935) or get help?
You can add the wheel (part# X8935) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet