Nylon Washer X8293
Price range: $0.79 through $2.99
Genuine Tacony OEM nylon washer (part# X8293) used in the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S brush assembly. Non-metallic, so it separates parts instead of galling them.
The Nylon Washer (part# X8293) is a genuine Tacony OEM replacement part from the brush assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the nylon washer that provides a low-friction, non-conductive bearing surface between two parts.
What the Nylon Washer does
Nylon is chosen where a metal washer would be wrong rather than merely different. It slides instead of gripping, so a part that has to rotate or shift slightly under load does so without picking up its neighbour, and it will not gall against aluminium or scratch a finished surface. It is also an insulator, which matters wherever two dissimilar metals would otherwise sit in contact in a permanently wet machine.
When to replace the Nylon Washer (X8293)
Replace it when it has worn thin, gone brittle and cracked, or deformed under load so it no longer holds the parts apart. Nylon that has been overheated glazes and hardens, and once that has happened it stops sliding and starts wearing whatever it was protecting.
Nylon Washer X8293 — fitment and installation notes
Do not substitute a steel washer because it is the same size; the material is the specification here. Tighten only to a firm seat, since nylon extrudes under excessive load, and check the surfaces on either side for scoring before fitting a new one. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Nylon Washer
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Nylon Washer do on the Tornado Marathon SE 900?
Nylon is chosen where a metal washer would be wrong rather than merely different. It slides instead of gripping, so a part that has to rotate or shift slightly under load does so without picking up its neighbour, and it will not gall against aluminium or scratch a finished surface. It is also an insulator, which matters wherever two dissimilar metals would otherwise sit in contact in a permanently wet machine.
How do I know if my Nylon Washer needs replacing?
Replace it when it has worn thin, gone brittle and cracked, or deformed under load so it no longer holds the parts apart. Nylon that has been overheated glazes and hardens, and once that has happened it stops sliding and starts wearing whatever it was protecting.
What models is the Nylon Washer (part# X8293) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Nylon Washer (part# X8293) or get help?
You can add the Nylon Washer (part# X8293) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
