Wire Harness 39343

The Wire Harness (part# 39343) carries power from the cord entry up through the handle to the switching on the Tornado CK 14/2 Pro, model 98152, and the Powr-Flite Borelli Dual Pro (PV160-W14-U). The factory lists it against the 14/2 specifically.

It is 14/2-specific for the same reason the terminal block is: a dual-motor machine has more to wire. The suction motor and the brush motor each need their own feed and their own switching, with a circuit breaker and a thermal switch in the path, and the harness is what ties that together as one pre-made loom rather than a handful of loose runs.

Compatible Models

• Tornado CK 14/2 Pro, model 98152
• Powr-Flite Borelli Dual Pro (PV160-W14-U)

When a harness is the answer

Harnesses do not wear out; they get damaged. The usual causes are a conductor chafed through where the loom passes a moulding edge, a connector pulled apart by someone separating the handle without releasing it first, or heat damage at a terminal that had worked loose. Any of those is a replacement rather than a repair on a machine used commercially — a taped splice inside a handle is not something you want in a building you are responsible for.

Fit it unplugged, route it exactly as the old one ran, and make sure it is clear of the moving parts in the handle before closing up. If a terminal on the old harness was discoloured, inspect whatever it was connected to as well: the heat came from somewhere, and a new harness into an old loose terminal will fail the same way.

Price and availability

The manufacturer does not publish a price for this part number in the dealer catalogue, so it is listed here as call-for-price rather than with a guessed figure. Call 763-535-0770 and we will quote it and confirm availability before you commit to an order.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Call 763-535-0770 with your model and serial number and we will confirm the part before you order.

Frequently Asked Questions

Which machines does this harness fit?

The Tornado CK 14/2 Pro, model 98152, and the Powr-Flite Borelli Dual Pro (PV160-W14-U).

Why is it specific to the 14/2?

Because a dual-motor machine has more to wire. Two motors, two switches, a circuit breaker and a thermal switch all sit in the path, and the harness ties that together as one loom.

Why is there no price shown?

The manufacturer does not publish a price for this part number in the dealer catalogue. We list it as call-for-price rather than guessing. Ring 763-535-0770 for a quote and lead time.