Find genuine Mytee 7000LX Flood Hog tank and pump-out parts for the Flood Hog flood extractor. Can’t find your part? Call us at 763-535-0770.
This drawing is tall, so it is shown at 700 pixels wide on this page; the clickable dots are placed and checked at that width.
Click on any numbered part in the diagram below to go directly to that part’s product page.
6. Cord Strain Relief Fitting – H2207. 1-1/2 in Drain Valve – H2258. Black Aluminum Grip Handle – H4859. Buna Washer 3/16 in ID – G05210. Washer 1/4 in ID x 1 in OD, Flat, Stainless – H21111. Bolt 1/4-20 x 3/4 in Serrated Hex Flange, Zinc – H76813. 7000LX Flood Hog Filter Basket – H02312. Flood Hog Vacuum Tank – P74514. 1-1/2 in MPT x 1-1/4 in PVC Adapter – P63115. 1-1/2 in Steel Lock Nut – H31416. 1-1/2 in PVC Adapter – H24417. 1-1/2 in PVC Pipe (cut length) – PH633-1118. 1-1/2 in Wire-Reinforced Vacuum Hose (cut length) – PH627-319. 2-1/4 in Hose Clamp – H21720. 7000LX Flood Hog 66 GPM Pump-Out Pump – C38821. 1/4 in Stainless Flat Washer – H21022. Screw 10-32 x 3/4 in Phillips Pan Head, Stainless – H2562. 10-32 x 1/2 in Pan Head Screw – H23021. 1/4 in Stainless Flat Washer – H21021. 1/4 in Stainless Flat Washer – H21023. 10-32 Kep Nut – H27324. 7000LX Flood Hog Pump-Out Pump Bracket – H05925. Hex Nut 1/4-20, Stainless – H21526. Bolt 1/4-20 x 1 in Hex Head, Stainless – H34221. 1/4 in Stainless Flat Washer – H21021. 1/4 in Stainless Flat Washer – H21027. Pump-Out Swing Check Valve – P68619. 2-1/4 in Hose Clamp – H21728. 1-1/2 in Black Wire-Reinforced Vacuum Hose (cut length) – PH627-1529. 1-1/2 in Hose Barb x 1-1/2 in FPT, Pump-Out – H39630. 7000LX Flood Hog 1-1/2 in Male Cam and Groove Fitting – H20731. 1-1/2 in Female Cam and Groove Fitting – H20532. 1-1/2 in PVC Pipe (cut length) – PH633-.2533. Foam Filter – G02234. 1.9 in Screen Mesh Filter – G09735. 1-1/2 in PVC Slip Adapter – P50236. 1 in Stainless Bar Handle – H54837. Vinyl Handle Grip – G04038. Bolt 1/4-20 x 2 in Hex Head – H16921. 1/4 in Stainless Flat Washer – H2109. Buna Washer 3/16 in ID – G05210. Washer 1/4 in ID x 1 in OD, Flat, Stainless – H21139. Lock Nut 1/4-20, Nylon Insert, Stainless – H21640. 12mm External C-Clip – H04241. 3 in Wheel – H358B43. Flood Hog Handle – P60942. Wheel Axle – H08944. 1/4 in 90 Degree Brass Street Elbow – B10345. Vacuum Shut-Off Float Switch – E37346. 1/4 in Brass Tee – B11347. 3 in Brass Nipple 1/4 in NPT – B30351. 1/4 in Brass Hex Nipple – B10748. 3/8 in MPT x 1/4 in Brass Hex Bushing – B10549. Washer 11/16 in ID x 1-1/2 in OD, Stainless – H29949. Washer 11/16 in ID x 1-1/2 in OD, Stainless – H29950. 1/2 in MPT x 3/8 in FPT Hex Bushing – B210This sheet covers the recovery tank and everything inside and around it: the H023 debris basket, the C388 66 GPM pump-out pump with its brackets, the P686 swing check valve, hose barb and H207 cam and groove outlet, the drain valve, the vacuum hoses and PVC pipe, the screen and foam filters, the E373 vacuum shut-off switch with its brass fittings, and the handle with its grips and small wheels. Item 52, a B142 brass coupling, is listed in the parts book but has no callout on the drawing, so it is added at the end of the table.
Mytee 7000LX Flood Hog Tank and Pump-Out Parts List
Frequently Asked Questions
What pump does the Flood Hog pump-out use?
The C388 66 GPM stainless pump-out pump, item 20.
What keeps debris out of the Flood Hog pump-out?
The H023 filter basket, item 13. Empty it after every job.
Why is item 52 not on the drawing?
The parts book lists the B142 coupling as item 52 but the drawing has no callout for it, so it is in the table at the end.
For the lid, or the base, motors and electrical parts, see the other drawings on the Mytee 7000LX Flood Hog parts hub.





























