Find genuine Mytee S-300 Tempo body, tank, pump and motor parts. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
12. Vacuum Motor Gasket – G00413. 2-Stage Peripheral Vacuum Motor – C31612. Vacuum Motor Gasket – G00410. Tempo Spotter Vacuum Tank – P6107. Vacuum Tank Deflector – G0586. 3.5 in Clear Vacuum Tank Lid – G0305. Screw #8 x 5/8 in Phillips Oval, Stainless – H30422. Cord Strain Relief Fitting – H22023. 25 ft 16/3 Lighted Power Cord – E53325. 2-Position Rocker Switch – E53626. Plastite Screw #10 x 1/2 in, Stainless – H02927. 3-Hole Switch Plate – H31016. 10-32 Kep Nut – H27317. Quick Disconnect Mounting Plate – H48418. Screw 10-32 x 3/4 in Phillips Pan Head, Stainless – H25628. 1/4 in Female Quick Disconnect, FPT – B10229. 1/4 in MPT x 1/4 in Push-In Brass Connector – B16630. Tempo Spotter Base – P61233. 55 PSI Solenoid Pump – C37839. 1/4 in FPT 90 Degree Brass Elbow – B20737. 9/16 in ID Flat Washer – H21237. 9/16 in ID Flat Washer – H21236. 1/4 in Filter Adapter – B11235. 1/4 in Filter Strainer – B11918. Screw 10-32 x 3/4 in Phillips Pan Head, Stainless – H25634. 55 PSI Pump Bracket Set – H25016. 10-32 Kep Nut – H27338. Tempo Spotter Solution Tank – P61142. Connecting Plate – H31241. 10-32 x 1/2 in Pan Head Screw – H23011. 2.5 in Tethered Cap – G0363. Bolt 1/4-20 x 1/2 in Serrated Hex Flange – H7704. Tempo Spotter Handle – H6113. Bolt 1/4-20 x 1/2 in Serrated Hex Flange – H7709. 1.33 in Screen Mesh Filter – G21614. Lock Nut 3/8-16 Flange, Nylon Insert, Stainless – H2061. Screw 8-32 x 3/8 in Socket Head, Black – H24634. 55 PSI Pump Bracket Set – H25032. 1/4 in Push-In x 1/8 in MPT Connector – B14031. Nylon Tubing 1/4 in, Black – PH657-424. Switch Plug – P967A2. Tempo Spotter Latch – H45119. Electrical Lock Nut 1/2 in, Steel – H2218. 1.33 in Foam Filter – G21731. Nylon Tubing 1/4 in, Black – PH657-429. 1/4 in MPT x 1/4 in Push-In Brass Connector – B16621. Screw 10-32 x 1/2 in Socket Head – H38920. Flat Washer #10, Stainless – H28916. 10-32 Kep Nut – H27329. 1/4 in MPT x 1/4 in Push-In Brass Connector – B16640. Nylon Tubing 1/4 in, Black – PH657-1415. 2 in Swivel Stem Caster – H63832. 1/4 in Push-In x 1/8 in MPT Connector – B14032. 1/4 in Push-In x 1/8 in MPT Connector – B140This drawing covers the main body of the Mytee S-300 Tempo spotter.
Mytee S-300 body parts on this drawing
At the top are the handle and latch, the clear recovery lid and cap, and the G217 foam and G216 screen filters. Below them sit the recovery and solution tanks and the C316 vacuum motor.
In addition, the drawing shows the C378 solenoid pump, the rocker switches, the base, the casters and the 25-foot cord. For example, weak spray usually points to the pump, its tubing or the quick disconnect.
However, parts marked Call are tank fittings, fasteners and tubing that Mytee does not sell on its website, so call us and we will order them. Also, one item in the book is not drawn on this sheet: the E395 wiring harness.
Mytee S-300 Body, Tanks, Pump & Motor Parts List
Frequently Asked Questions
Which filters does the S-300 Tempo use?
The S-300 uses the G217 foam filter and the G216 screen filter, items 8 and 9 on this drawing. Clean them after every job; a clogged filter is the most common cause of weak suction.
My S-300 has suction but no spray. What should I check?
Start with the quick disconnect and the solution hose, then the strainer and tubing in the solution tank, then the C378 pump and the pump switch. If the pump hums but does not spray, it may have lost its prime or the solenoid may have failed.
Which vacuum motor fits the S-300?
The parts book lists the C316 vacuum motor. Mytee also sells the A318 motor kit for S-300 models from 2017 and newer; call us with your serial number if you are not sure which you need.
Why do some parts say Call?
Mytee does not sell every fastener, fitting and length of tubing on its website. Call 763-535-0770 with the item number from this drawing and we will order it.
Need the hose or the upholstery tool? See the S-300 hose and tool parts, or go back to all Mytee S-300 Tempo parts diagrams. You can also see the machine on mytee.com.































