CleanMax CPU-3N – Nozzle Housing with Furniture Guard (Black Replacement Part) – C625-0111

The CleanMax CPU-3N nozzle housing with furniture guard (part# C625-0111) is the molded outer shell of the power nozzle on the CleanMax CPU-3N commercial upright. It is the structural body that everything in the nozzle mounts into — the brushroll and its bearings, the drive belt, the headlight lens and socket, and the foot-pedal height-adjust linkage all locate to this housing. The integrated black furniture guard runs around the leading edge so the nozzle can brush up against baseboards and furniture legs without scuffing them.

Compatible Models

• CleanMax CPU-3N commercial upright
• CleanMax CPU-3QD (shares the same nozzle assembly)

Because the nozzle diagram is shared between the CPU-3N and CPU-3QD, this housing fits both machines. If you are not certain which nozzle body your machine uses, call 763-535-0770 and we will confirm it by serial number.

Replace the nozzle housing when the shell is cracked or broken at a mounting boss, when the furniture guard has torn away or gone brittle, or when a bearing seat or belt channel has worn to the point that the brushroll no longer sits square. A cracked housing usually shows up as new rattles, a brushroll that walks side to side, or belt wear that returns quickly after a fresh belt. Because so many parts index off this shell, a distorted housing can cause repeat failures downstream, so it is worth replacing rather than patching. Installation is straightforward for a technician: transfer the brushroll, belt, bearings, headlight parts and pedal linkage into the new housing in the same positions, keeping the heat-sink and mounting hardware exactly as found.

Twin City Vacuum has been selling and servicing CleanMax equipment since 1956. All parts are sourced directly from Tacony. Browse the full CleanMax CPU-3N nozzle assembly parts list, or see the manufacturer at cleanmax.com.

Frequently Asked Questions

What does the nozzle housing do on the CleanMax CPU-3N?

The nozzle housing (part# C625-0111) is the molded outer body of the power nozzle. Every nozzle component — brushroll, belt, headlight and foot-pedal linkage — mounts into it, and its built-in furniture guard protects baseboards and furniture as you clean.

How do I know if my CPU-3N nozzle housing needs replacing?

Look for cracks at the mounting bosses, a torn or brittle furniture guard, new rattles, or a brushroll that no longer sits square and chews through belts. A distorted housing causes repeat downstream failures, so replace it rather than patch it.

What models is the nozzle housing (part# C625-0111) compatible with?

It fits the CleanMax CPU-3N and the CleanMax CPU-3QD, which share the same nozzle assembly. Call 763-535-0770 to confirm by serial number if you are unsure.

How do I order the nozzle housing (part# C625-0111) or get help?

You can add the nozzle housing (part# C625-0111) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.