Pump 120 PSI AQ120
$302.99
Genuine Tacony OEM 120 PSI solution pump (part# AQ120) for the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S. The pressure rating is the spec that matters, because it sets what the jets actually deliver.
Replaces FJ2030X. Tacony has superseded part number FJ2030X with AQ120. Order AQ120 — it is the current part for this position and fits in place of FJ2030X. Questions? Call 763-535-0770.
The Pump 120 PSI (part# AQ120) is a genuine Tacony OEM replacement part from the chassis assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the solution pump that pressurises cleaning solution from the tank and delivers it to the spray jets.
What the Pump 120 PSI does
Everything the machine does at the carpet starts here. The pump takes solution from the tank and holds it at a set pressure so each jet produces the spray pattern the wand was designed around. Pressure is what determines whether solution is atomised into the fibre or merely poured onto it, so a pump that has drifted low does not stop the machine, it just quietly makes every pass less effective while the operator wonders why the carpet is taking longer to dry.
When to replace the Pump 120 PSI (AQ120)
Replace it when pressure is low or will not build, when output pulses badly, when it runs but moves nothing, or when it has become noisy or is cycling constantly. Before condemning it, rule out a blocked filter, an air leak on the suction side, and a partly closed valve, since all three imitate a failing pump.
Pump PSI AQ120 — fitment and installation notes
Never run it dry, even briefly, because the seals depend on the fluid for cooling and lubrication. Prime it properly on first start, keep the inlet filter clean, and flush the system with clear water at the end of a job so cleaning chemistry is not left sitting in the pump between uses. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Pump 120 PSI
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Pump 120 PSI do on the Tornado Marathon SE 900?
Everything the machine does at the carpet starts here. The pump takes solution from the tank and holds it at a set pressure so each jet produces the spray pattern the wand was designed around. Pressure is what determines whether solution is atomised into the fibre or merely poured onto it, so a pump that has drifted low does not stop the machine, it just quietly makes every pass less effective while the operator wonders why the carpet is taking longer to dry.
How do I know if my Pump 120 PSI needs replacing?
Replace it when pressure is low or will not build, when output pulses badly, when it runs but moves nothing, or when it has become noisy or is cycling constantly. Before condemning it, rule out a blocked filter, an air leak on the suction side, and a partly closed valve, since all three imitate a failing pump.
What models is the Pump 120 PSI (part# AQ120) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Pump 120 PSI (part# AQ120) or get help?
You can add the Pump 120 PSI (part# AQ120) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
