Spray Manifold X9021
$56.99
Genuine Tacony OEM spray manifold (part# X9021) for the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S. Distributes solution to the jets so the whole width of a pass gets the same amount.
The Spray Manifold (part# X9021) is a genuine Tacony OEM replacement part from the brush assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the manifold that takes pressurised solution from the pump and distributes it evenly to the spray nozzles.
What the Spray Manifold does
The manifold is what turns one supply line into an even spray across the full cleaning width. Its internal passages are sized so each nozzle sees the same pressure, which is why a machine lays down a consistent amount of solution rather than soaking one side and barely wetting the other. When those passages restrict or a port cracks, the symptom appears at the nozzles and the manifold is rarely the first thing suspected.
When to replace the Spray Manifold (X9021)
Replace it when it is cracked, when a nozzle port thread is damaged or will not seal, or when internal restriction cannot be cleared by flushing. Streaky cleaning, one dry section across a pass, or solution weeping from the body rather than the jets all point here.
Spray Manifold X9021 — fitment and installation notes
Flush the system with clear water at the end of a job so chemistry does not dry inside the passages, since that is what builds the restriction in the first place. When refitting, seal each nozzle port properly, check every jet fires evenly before the machine goes back to work, and do not clear a blocked port with anything that will scratch the seat. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Spray Manifold
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Spray Manifold do on the Tornado Marathon SE 900?
The manifold is what turns one supply line into an even spray across the full cleaning width. Its internal passages are sized so each nozzle sees the same pressure, which is why a machine lays down a consistent amount of solution rather than soaking one side and barely wetting the other. When those passages restrict or a port cracks, the symptom appears at the nozzles and the manifold is rarely the first thing suspected.
How do I know if my Spray Manifold needs replacing?
Replace it when it is cracked, when a nozzle port thread is damaged or will not seal, or when internal restriction cannot be cleared by flushing. Streaky cleaning, one dry section across a pass, or solution weeping from the body rather than the jets all point here.
What models is the Spray Manifold (part# X9021) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Spray Manifold (part# X9021) or get help?
You can add the Spray Manifold (part# X9021) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
