Hose Clamp 7DL005
$8.99
Genuine Tacony OEM hose clamp (part# 7DL005) used on the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S. A different size from the other clamps on the machine, so match it to the joint it came off.
The Hose Clamp (part# 7DL005) is a genuine Tacony OEM replacement part from the recovery and solution tank assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the clamp specified for a particular hose joint in the tank and plumbing assembly.
What the Hose Clamp does
Extractors carry several hose sizes, and the clamps that go with them are not interchangeable even though they look almost identical in a parts drawer. Keeping the specified clamp at each joint is what stops a technician from discovering, six months later, that a clamp wound to the edge of its range has quietly relaxed and started weeping.
When to replace the Hose Clamp (7DL005)
Replace it whenever a joint is opened and the clamp shows corrosion, a chewed adjusting screw, or a band that has taken a permanent bend. Reusing a clamp that has already been through several cycles is one of the more common reasons a repaired joint leaks again.
Hose Clamp 7DL005 — fitment and installation notes
Get the clamp on the hose before the hose goes on the barb; trying to feed a clamp over an installed hose usually means it ends up in the wrong place. Orient the screw head where a driver can reach it without dismantling something else, and re-check the joint after the first run when everything has warmed and settled. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Hose Clamp
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Hose Clamp do on the Tornado Marathon SE 900?
Extractors carry several hose sizes, and the clamps that go with them are not interchangeable even though they look almost identical in a parts drawer. Keeping the specified clamp at each joint is what stops a technician from discovering, six months later, that a clamp wound to the edge of its range has quietly relaxed and started weeping.
How do I know if my Hose Clamp needs replacing?
Replace it whenever a joint is opened and the clamp shows corrosion, a chewed adjusting screw, or a band that has taken a permanent bend. Reusing a clamp that has already been through several cycles is one of the more common reasons a repaired joint leaks again.
What models is the Hose Clamp (part# 7DL005) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Hose Clamp (part# 7DL005) or get help?
You can add the Hose Clamp (part# 7DL005) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
