Rocker Switch X9007
$4.99
Genuine Tacony OEM rocker switch (part# X9007) for the Tornado Marathon SE 900 (Model 98170) and Powr-Flite Prowler PFX900S control panel. Rated for the load it carries, which is why the rating matters more than the shape.
The Rocker Switch (part# X9007) is a genuine Tacony OEM replacement part from the recovery and solution tank assembly of the Tornado Marathon SE 900 self-contained carpet extractor. It is the panel-mounted rocker switch that makes and breaks one of the machine control circuits.
What the Rocker Switch does
A switch is a set of contacts that has to open and close under load thousands of times without welding or burning. The current and voltage rating is what determines whether it does that or slowly cooks itself, so a visually identical switch of a lower rating is not a substitute. On an extractor the switch also has to keep water out of the contact chamber, which is part of what you are buying.
When to replace the Rocker Switch (X9007)
Replace it when it feels vague or no longer snaps between positions, when the circuit works only if the switch is held at an angle, or when the body shows heat discolouration or a burnt smell. Intermittent operation that responds to tapping the panel is a switch until proven otherwise.
Rocker Switch X9007 — fitment and installation notes
Work with the machine unplugged and photograph the terminal connections before removing any wire, since rockers are easy to reconnect in a way that looks right and is not. Clip the new switch fully home so its seal meets the panel, and confirm the off position actually breaks the circuit before reassembling. Tacony builds the Tornado Marathon SE 900 and the Powr-Flite Prowler PFX900S on a single machine platform, so this component carries across both brands rather than belonging to either one. It is a shared Tacony component and may fit additional models beyond those listed — call us and we will confirm against your serial number.
Compatible Models for the Rocker Switch
- Tornado Marathon SE 900 — Model 98170
- Powr-Flite Prowler PFX900S
- Powr-Flite PFX900SG
Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956 from 5415 West Broadway, Crystal, MN 55428. We stock genuine Tacony parts and ship nationwide. Browse the full Tornado 98170 parts catalogue, or see the manufacturer at tornadovac.com.
Frequently Asked Questions
What does the Rocker Switch do on the Tornado Marathon SE 900?
A switch is a set of contacts that has to open and close under load thousands of times without welding or burning. The current and voltage rating is what determines whether it does that or slowly cooks itself, so a visually identical switch of a lower rating is not a substitute. On an extractor the switch also has to keep water out of the contact chamber, which is part of what you are buying.
How do I know if my Rocker Switch needs replacing?
Replace it when it feels vague or no longer snaps between positions, when the circuit works only if the switch is held at an angle, or when the body shows heat discolouration or a burnt smell. Intermittent operation that responds to tapping the panel is a switch until proven otherwise.
What models is the Rocker Switch (part# X9007) compatible with?
The Tornado Marathon SE 900 (Model 98170), the Powr-Flite Prowler PFX900S and the PFX900SG. It is a shared Tacony part and may fit further models; call us to confirm.
How do I order the Rocker Switch (part# X9007) or get help?
You can add the Rocker Switch (part# X9007) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
